6
3. The timer display will flash several times then switch back to the current time of day.
4. Press and release the AUTO button to activate the delay start time that was just
programmed. The timer icon ( ) will remain solid, indicating Auto Brew is activated.
5. When the time of day matches the programmed Auto Brew set time, your
coffeemaker will activate the brew cycle.
6. To cancel the Auto Brew function, press the AUTO button until the timer
icon ( ) disappears.
Note: To check the preset Auto Brew time, press PROG button to display the
preset Auto Brew time. Press AUTO button to reactivate the timer.
Using the 1-4 Cup Setting
This brew setting optimizes the brewing cycle so you can make a smaller
batch of coffee without giving up any of the flavor. To brew 1-4 cups, simply
push the 1-4 Cup button until the corresponding symbol is displayed on the
LCD display.
Setting the Brew Strength Selector
The Brew Strength Selector customizes the flavor of your coffee by selecting
from three brew strength settings.
1. Press the STRONG button to cycle through the different Brew Strength settings
(3 levels).
a. No bars = regular (default setting)
b. 1 bar ( ) = strong
c. 2 bars ( ) = bold
To Next Page
Loading...
Need help?
General
