To Next Page
J
Jose HughesAug 6, 2025
What to do if my Black & Decker CS1014 Saw won't start?
- TTeresa JonesAug 6, 2025
If your Black & Decker Saw won't start, first ensure it's properly plugged into a working outlet. If it still doesn't start, check the circuit fuse. If the fuse is blown, replace it. However, if the product repeatedly causes the circuit fuse to blow, stop using it immediately and have it serviced at a Black & Decker service center or authorized servicer. Also, check if the circuit breaker has tripped and reset it. Again, if the product repeatedly trips the circuit breaker, discontinue use and seek professional servicing at a Black & Decker service center or authorized servicer. If the cord or switch is damaged, have it replaced at an authorized Black & Decker service center.
General
