Objectives
This manual will help you plan, configure, mount, wire, connect, check out, and
troubleshoot your 984 slot-mount controller system, including 984/800 Series
Remote I/O. After reading this book:
o A Control Engineer will be able to identify and physically plan the location and
mounting of system components.
o A Plant Electrician/Installer will be able to install, power-up, and check out the
system.
o A Maintenance Technician will be able to recognize, locate, identify, and re-
solve or report system failures.
How To Use This Manual
Chapter
1
describes the various controllers and their functions.
Chapter 2 offers information for planning your installation.
Chapter 3 is an installation procedure for your controller with local I/O and
Remote I/O.
Appendix A gives system specifications.
Appendix B gives troubleshooting assistance.
iv Preface
To Next Page