Incoming Inspection Guidelines
Guidelines for Inspection
o Before you do anything, verify your shipment is complete and undamaged. If
the shipment is incomplete or damaged, notify the carrier and your distributor.
o Remove everything from its packing and check for physical defects or damage.
If the equipment is physically defective or damaged, notify your Modicon repre-
sentative.
ID=
Note
Save shipping materials until installation is complete.
Sending Something Back?
o Whenever possible, use the original packing materials supplied by Modicon.
o All equipment should be firmly packed so that it cannot move around in its ship-
ping container.
o All equipment should be protected against impact during shipment.
IJ All equipment should be clearly marked with its Return Authorization Number
@A#).
vi Preface
To Next Page
Loading...
