Need help?Do you have a question about the Black & Decker EPC18 and is the answer not in the manual?
General| Type | Cordless Drill |
|---|---|
| Voltage | 18V |
| Chuck Size | 10 mm |
| No Load Speed | 0-750 RPM |
| Power Source | Battery |
| Battery Type | NiCd |
| Speed | Single |
Covers warnings related to work area, electrical safety, personal safety, and tool use and care.
Guidelines for maintaining a clean, well-lit workspace and preventing accidents due to distractions or hazardous atmospheres.
Precautions for safe electrical connections, avoiding contact with earthed surfaces, and using appropriate cords.
Guidelines for user alertness, protective equipment, preventing unintended starts, and proper attire.
Covers alertness, PPE use, preventing unintentional starting, maintaining balance, proper dress, and dust extraction.
Instructions on correct tool usage, maintenance, and safe storage practices.
Covers not forcing the tool, ensuring switch functionality, disconnecting power, safe storage, and regular maintenance.
Covers charger compatibility, battery pack designation, safe storage, and avoiding liquid contact.
Ensures tool safety is maintained by using qualified repairers and identical replacement parts.
Covers noise protection, auxiliary handles, workpiece securing, wiring checks, and user limitations.
Rules for safe handling, charging, storage, and disposal of batteries and chargers.
Highlights the importance of reading the manual to reduce the risk of injury.
Explains that the charger is double insulated, meaning no earth wire is required.
Lists features like variable speed switch, forward/reverse slider, and mode selector/torque collar.
Covers fitting/removing battery, cap, bits, and chuck for tool setup.
Details on using the variable speed switch to control tool speed and power.
Advice on drilling techniques, including pressure, workpiece support, and bit selection.
Instructions for cleaning ventilation slots and motor housing to maintain performance.
To Next Page
