Black & Decker FireStorm CD231 User Manual

#B1ACK&DECKER
8.4V, 9.6V, 12V, 13.2V, 14.4V, 15.6V
& 18V 3/8" CORDLESS DRILLS
INSTRUCTION MAMUAL
Catalog Numbers CD231, CD431, CD632, HP131,
HP231,HP331, HP431,HP532, HP932, FS432, FS632, FS840, FS1320, FS1560
BEFORE RETURrsJING THIS PRODUCT
FOR ANY'REASON PLEASE ^ACL
1 -800-54-H#y-i© (544-^
IF YOU SHOULD EXPERIENCE A PROBLEM
WITH YOUR BLACK & DECKER PURCHASE,
CALL 1-800-54-HOW-TO (1-800-544-6986).
IN MOST CASES, A BLACK & DECKER REPRESENTATIVE
CAN RESOLVE YOUR PROBLEM OVER THE PHONE.
IF YOU HAVE A SUGGESTION OR COMMENT,
GIVE US A CALL. YOUR FEEDBACK IS VITAL
TO THE SUCCESS OF BLACK & DECKER'S QUALITY
IMPROVEMENT PROGRAM.
KEY INFORA/\ATiON YOU SHOULD KNOW:
• Battery pack must be charged for rf iree hours before initial use.
• Charger may hum; batteries or charger may become warm during charging.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
VEA EL ESPANOL EN LA CONTRAPORTADA.
INSTRUCJIVO DE OPERACION, CENTROS DE SERVICIO Y POUZA DE
GARANTIA. ADVERTCNCIA: LEASE ESTE [NSTRUOIVO AlvlTES DE USAR EL
PRODUaO.
Cot. Nos. CD231, CD431,CD632, HP131, HP231, HP33LHP431, HP532, HP932, FS432, FS632, FS840, FS1320, FS1560
Form No. 154806 (JUL99-1) Copyright©! 999 Black & Decker Printed in China
GENERAL SAFETY RULES - FOR ALL BAHERY OPERATED TOOLS
AwARNING! read and understand Aa INSTRUCnONS. Failure to follow oil instrucHons
listed below, may result in electric shock, fi re ond/or serious personal injury
SAVE THESE INSTRUaiONS
WORK AREA
• Keep your wodc area clean and well lit. Cluttered benches and dork areas invite accidents.
• Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids,
gases, or dust. Power tools create sparks v4iich may ignite the dust or fumes.
• Keep bystanders, children, and visitors away while operating a power tool. Distractions con cause you to
lose control.
ELECTRICAL SAFETY
• Do not abuse the cord. Never use the cord to carry the tool. Keep cord away from heat, oil, sharp edges
or moving parts. Replace damaged cords immediately. Damaged cords may create a fire.
• A battery operated tool with integral batteries or a separate battery pack must be recha^ed only vrilh
the specified charger for the battery. A charger that may be suitable for one type of battery may create a
ri sk of fire when used with another battery.
• Use battery operated tool only with specifically designated battery pack. Use of any other batteries may
create a rislc of fire.
CACPTV

Black & Decker FireStorm CD231 Specifications

General

Brand	Black & Decker
Model	FireStorm CD231
Category	Power Screwdriver
Language	English

Summary

General Safety Rules for Battery Operated Tools

Work Area Safety

Ensures safe operation by maintaining a clean, well-lit area and avoiding explosive atmospheres.

Electrical Safety

Guidelines for safe use of cords and battery packs to prevent shock, fire, or injury.

General Safety Rules for Battery Operated Tools (Continued)

Personal Safety

Advises on staying alert, proper dress, avoiding accidental starting, and using safety equipment.

Tool Use and Care

Instructions on securing workpieces, using tools correctly, and maintaining them for safe operation.

Specific Safety Rules

Extension Cord Safety

Guidelines for selecting and using extension cords to prevent fire or electric shock.

Battery Leakage Handling

Procedures for handling battery leakage safely, including first aid and neutralization.

Charging the Drill

Charging the Power Pack

Step-by-step instructions for charging the battery pack using the supplied charger.

Important Charging Notes

Key information regarding charging times, temperature, and troubleshooting charging issues.

Drill Safety Warnings and Instructions

Drill Operation Basics

Fundamental safety advice for operating the drill, including holding and accessory attachment.

Switch and Controls

Explanation of the forward/reverse control button and trigger switch functionality.

Torque and Gear Settings

How to use the torque adjustment collar and dual-range gearing for optimal drilling.

Keyless Chuck Operation

Instructions on how to attach and tighten drill bits and accessories using the chuck.

Drilling Procedures

Best practices for drilling, including bit selection, pressure, and handling stalls.

Tool Maintenance

Guidelines for cleaning and maintaining the tool to ensure safety and reliability.

Battery Recycling (RBRC)

Information on the RBRC program for environmentally conscious recycling of batteries.

Drill Operating Instructions (Continued)

Accessory Guidelines

Recommendations for accessory usage and warnings about incompatible accessories.

Two-Year Home Use Warranty