Black & Decker FIRESTORM FS210LS - Parts Identification; Rip Fence Parts; Blade Raising Handwheel Parts; Miter Gage Holder Parts

8
Fig. 2
RIP FENCE
P
ARTS
(11,12)
11-Rip Fence
12-Locking Handle for Rip Fence
BLADE RAISING HANDWHEEL P
ARTS
(13,14,15,16,17)
13-Blade Raising and Lowering Handwheel
14-Handle for Blade Raising and Lowering handwheel
15-Screw for Mounting Handwheel Handle
16-Cap for Handle
17-M6X1X12mm Flat Head Screw for Mounting Blade
Raising and Lowering Handwheel
18-Miter Gage
MITER
GAGE
HOLDER
PARTS
(19,20,21,22,23,24,25)
19-M4.2X10mm Pan Head Tap Screws for Mounting
Miter Gage Holder(4)
20-Lockwasher for Mounting Miter Gage Holder(4)
21-Miter Gage Holder
22-Spring Clip for Miter Gage Holder
23-M4X0.7X10mm Pan Head Screw for Miter Gage
Holder
24-3/16 in.External Tooth Lockwasher for Miter Gage
Holder
25-M4X0.7mm Hex Nut for Miter Gage Holder
SPLITTER BRACKET PARTS (26,27,28,29,30,31,32,33,
34,35,36,37)
26-1/4-20X2-1/4 in.Long Hex Head Screw for Mounting
Splitter Bracket
27-1/4 in.Internal Tooth Lockwasher for Mounting
Splitter Bracket
28-1/4 in.Flat Washer for Mounting Splitter Bracket
29-1/4 in.External Tooth Lockwasher for Mounting
Splitter Bracket
30-Splitter Bracket
31-1/4 in.External Tooth Lockwasher for Splitter
Bracket(2)
32-Splitter Support Bracket
33-1/4-20X1/2 in.Hex Head Screws for Splitter
Bracket(2)
34-Wing Nut for Mounting Splitter Support Bracket
35-1/4 in.External Tooth lockwasher for Splitter
Bracket(2)
36-1/4 in.Flat washer for Mounting Splitter Support
Bracket(2)
37-M6X1X20mmHex Head Screw for Mounting Splitter
Support Bracket
38-Splitter and Guard Assembly
39-Fence Left Rail
40-Fence Right Rail
FENCE RAIL
PAR
TS
(41,42,43,44,45)
41-M6 Lockwasher for Mounting Fence Rail(14)
42-1/4 in. Flat washer for Mounting Fence Rail(5)
43-1/4 in.-20 Hex Nut for Mounting Rail and Extension
Wings(5)
44-Spacers for Mounting Fence(9)
45-1/4 in.-20X1-1/4 Round Head Screws for Mounting
Fence Rail (9)
OUTFEED SUPPORT
P
ART
S
(46,47,48,49,50,51,52)
46-Rod for Rear Support (2)
47-Rear Support
48-M6X1X15mm Hex Cross Screw for Bracket(8)
49-M6 Lockwasher for Mounting Bracket(8)
50-1/4 in.-20X1/2 in. Hex Head Screw for Rod(4)
51-Bracket(4)
52-1/4 in.Flat Washers for Mounting Rod(4)
53-Wrenches for Blade Changing