Black & Decker FS1806CS User Manual

0505019 FS Circ Saws 7/14/06 8:50 AMwihPage 1
INSTRUCTION MANUAL
Catalog Numbers
without lasers
FS1806CS
Catalog Numbers
with lasers
FS1806CSL
FS1807CS
FS2406CS
FS2407CSL
BEFORE RETURNING THIS PRODUCT
FOR ANY REASON PLEASE CALL
1-800-544-6986
BEFORE YOU CALL, HAVE THE FOLLOWING INFORMATION AVAILABLE, CATALOG No.,TYPE No., AND
gATE CODE. IN MOST CASES, A BLACK & DECKER REPRESENTATIVE CAN RESOLVE THE PROBLEM
OVER THE PHONE F YOU HAVE A SUGGESTION OR COMMENT, GIVE USA CALL YOUR FEEDBACK
IS VITALTO BLACK & DECKER.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
VEA EL ESPAI_IOL EN LA CONTFIAPORTADA.
INSTRUCTIVO DE .OPERACION, CENTROS DE SERVICIO Y POLIZA DE GARANTiA.
ADVERTENClA: LEASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO.

Black & Decker FS1806CS Specifications

General

Brand	Black & Decker
Model	FS1806CS
Category	Saw
Language	English

Summary

General Safety Rules for Battery Operated Tools

Electrical Safety

Personal Safety

Tool Use and Care

Specific Safety Rules

Causes and Operator Prevention of Kickback

Explanation of kickback phenomena and methods to prevent it during saw operation.

Additional Safety Rules: Circular Saws

Specific safety advice for circular saw operation, including dust, chemicals, and hearing protection.

Safety Instructions - Lasers

Safety Warnings and Instructions: Charging

Charging the Battery

Assembly/Adjustment Set-Up

Cutting Depth Adjustment

How to set the saw blade depth for optimal cutting based on workpiece thickness.

Bevel Angle Adjustment

Procedure for adjusting the saw's bevel angle for angled cuts, up to 50 degrees.

Shoe Adjustment for 90° Cuts

Operating Instructions

Guard Against Kickback

Critical steps to prevent kickback during saw operation, ensuring operator safety.

Attaching and Removing the Blade

Lower Blade Guard

Laser Operation and Adjustment

Instructions for installing, switching on/off, and adjusting the laser guide for precise cuts.

Sawing and Pocket Cutting

Maintenance

Troubleshooting

Service Information