What to do if my Black & Decker jus375ib fails to jump-start?
If your Black & Decker Remote Starter isn't jump-starting: * Ensure the unit's power switch is in the ON position. * Check that the unit has a full charge, and recharge if necessary. * Verify that a proper polarity cable connection has been established.
How to fix Black & Decker Remote Starter that will not charge?
If your Black & Decker Remote Starter isn't charging, ensure the Jump Starter power switch is in the off position and that a suitable gauge extension cord is properly connected to both the unit and a functioning AC outlet.
What to do if 12 volt DC portable power supply of Black & Decker Remote Starter will not power appliance?
If the 12 volt DC portable power supply of your Black & Decker Remote Starter won't power the appliance, make sure the appliance does not draw more than 5 amps. Also, check that the unit has a full charge; recharge it if necessary.
General safety precautions for product operation.
Explains hazard symbols like DANGER, WARNING, and CAUTION.
Safety guidelines for using power cords and extension cords.
Critical safety guidelines for using the jump-starter function.
Key safety warnings for operating the battery charger function.
Highlights the main components and functions of the product.
Instructions for the first-time charging of the jump-starter.
Step-by-step guide for jump-starting vehicles.
Instructions for powering 12V DC accessories.
How to connect and charge using terminal rings.
How to connect and charge using the 12V DC adapter plug.
Solutions for common jump-starter and charger problems.
Details of the product's limited one-year warranty.
Technical details and ratings for the product.
General| Brand | Black & Decker |
|---|---|
| Model | jus375ib |
| Category | Remote Starter |
| Language | English |
To Next Page