Black & Decker Start-It Jump 'n Charge VEC012BBD User Manual

VEC012BBD
USER’S MANUAL
& WARRANTY INFORMATION
IMPORTANT SAFETY INFORMATION, SAVE THESE
INSTRUCTIONS
TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND
THIS INSTRUCTIONAL MANUAL. THIS MANUAL CONTAINS IMPORTANT
INFORMATION REGARDING THE OPERATION AND WARRANTY OF THIS
PRODUCT. PLEASE RETAIN FOR FUTURE REFERENCE.
www.vectormfg.com
4140 S.W. 30th Ave., Ft. Lauderdale, FL 33312 U.S.
Toll Free: (800) 618-5178
12
START-IT
®
Jump ’n Charge
™
Smart
™
Battery Charger/Jump-Starter
with 450 Instant Starting Amps
12 Volt DC Power Supply • LED Emergency Area Light
TWO YEAR LIMITED WARRANTY PROGRAM
This limited warranty program is the only one that applies to this product, and it sets forth all the
responsibilities of Vector Manufacturing, regarding this product. There is no other warranty, other than
those described herein. Any implied warranty of merchantability or fitness for a particular purpose on
this product is limited in duration to the duration of this warranty.
This Vector Manufacturing product is warranted, to the original purchaser only, to be free of defects in
materials and workmanship for two years from the date of purchase without additional charge. The
warranty does not extend to subsequent purchasers or users. Manufacturer will not be responsible for
any amount of damage in excess of the retail purchase price of the product under any circumstances.
Incidental and consequential damages are specifically excluded from coverage under this warranty.
This product is not intended for commercial use. This warranty does not apply to damage to units from
misuse or incorrect installation/connection. Misuse includes wiring or connecting to improper polarity
power sources.
RETURN/REPAIR POLICY: Defective products may be returned to manufacturer. Any defective product
that is returned to manufacturer within 30 days of the date of purchase will be replaced free of charge.
If such a product is returned more than 30 days but less than two years from the purchase date,
manufacturer will repair the unit or, at its option, replace it, free of charge.
If the unit is repaired, new or reconditioned replacement parts may be used, at manufacturer’s option.
A unit may be replaced with a new or reconditioned unit of the same or comparable design. The
repaired or replaced unit will then be warranted under the terms of the remainder of the warranty
period. The customer is responsible for the shipping charges on all returned items. During the warranty
period, manufacturer will be responsible for the return shipping charges to the customer in the United
States.
LIMITATIONS: This warranty does not cover accessories, such as charging adapters, bulbs, fuses and
batteries, damage or defects resulting from normal wear and tear (including chips, scratches, abrasions,
discoloration or fading due to usage or exposure to sunlight), accidents, damage during shipping to our
service facility, alterations, unauthorized use or repair, neglect, misuse, abuse, failure to follow
instructions for care and maintenance, fire, flood and Acts of God.
If your problem is not covered by this warranty, call our Technical Support Department toll free at (800)
618-5178 for general repair information and charges if applicable. You may also contact us through
our website at www.vectormfg.com.
STATE LAW RIGHTS: This warranty gives you specific legal rights. Some states do not allow limitations
on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential
damages, so the exclusions or limitations stated herein may not apply. This warranty gives the purchaser
specific legal rights; other rights, which vary from state to state, may apply.
TO REQUEST WARRANTY SERVICE FOR THIS PRODUCT: Contact Technical Support by telephone, fax
or mail (see below). We suggest that you keep the original packaging in case you need to ship the unit.
When returning a product, include your name, address, phone number, dated sales receipt (or copy)
and a description of the reason for return and product serial number. After repairing or replacing the
unit, we will make every effort to return it to you within four weeks.
WARRANTY ACTIVATION: Please complete Warranty Activation Card and mail to Vector
Manufacturing. Enter “VEC012BBD” as Model and “START-IT
®
Jump ’n Charge
™
” as Product Type. All
Vector products must be registered within 30 days of purchase to activate this warranty. Mail the
completed registration form, along with a copy of the original sales receipt, to:
ATTN.: CUSTOMER SERVICE
4140 SW 30th Ave., Ft. Lauderdale, FL 33312
• TOLL FREE: (800) 618-5178 •
WARRANTY IS NON-TRANSFERABLE.
BD020106
© 2006 VECTOR MANUFACTURING
MADE IN CHINA
VEC012BBD_ManualEN_020106 2/1/06 3:13 PM Page 12

Black & Decker Start-It Jump 'n Charge VEC012BBD Specifications

Power

boost ampere	450 instantaneous cranking amps
battery type	Sealed, high energy density, AGM, lead-acid, rechargeable, maintenance-free, 12 volt DC
dc charging adapter	12 volt DC

Cables and Outlets

booster cables	Heavy duty welding cable with 450 Amp copper clamps
accessory outlet	Self-resetting breaker 5 amps
area light	Light Emitting Diode (LED)

Summary

Two Year Limited Warranty Program

Warranty Policies and Procedures

Covers return/repair policy, limitations, state law rights, requesting service, and activation procedures.

Warranty Activation and Registration

Details the process for activating and registering the product's warranty.

Important Safety Instructions

General Safety Precautions

User must read and understand this manual for important safety information.

General Safety Instructions

Warnings and Battery Safety

Covers warnings about explosive gases, battery handling, and electrical safety.

Safe Operating Procedures

Details safe practices for charging, location, connections, and personal safety.

First Aid and Power Cord Safety

Provides first aid for acid exposure and safety tips for power cords.

Introduction to the Smart Battery Charger/Jump-Starter

Product Overview and Key Features

Details the product's capabilities as a jump-starter, power supply, and emergency light.

Smart™ Battery Charger Operation

3-Stage Charging Technology

Explains the high-efficiency 3-stage charging process for batteries.

Key Product Features

Lists main features like charge rates, digital display, alternator check, and LED light.

Controls and Indicators

Panel Layout and Component Identification

Identifies all controls and indicators on the unit's front and back panels.

Digital Display and Status Codes

Explains the meaning of digital display codes and LED indicators.

Using the Battery Charger

Charge Rate Selection

Guides the user on selecting the appropriate charge current rate based on battery size.

Charging the Battery

Step-by-step instructions for connecting and charging a battery.

Automatic Float Charging

Explains how to maintain a battery in a fully charged state.

Alternator Check Procedure

Performing the Alternator Test

Instructions for testing the vehicle's alternator under no-load and load conditions.

Approximate Charging Times

Charging Time Estimates

Provides estimates for battery charging times based on charge rate and battery capacity.

Using the Jump-Starter

Jump-Starting Procedures

Step-by-step guide for jump-starting a vehicle with a 12-volt battery system.

Using the 12 Volt DC Portable Power Supply

Connecting 12V DC Accessories

Instructions for using the unit as a portable 12V DC power source.

Using the Emergency LED Area Light

Operating the LED Light

Details on how to operate the emergency LED area light.

Care and Maintenance

Battery Care and Recharging

Guidelines for maintaining battery health through proper charging and storage.

120 Volt AC Recharge Method

Instructions for recharging the unit using a standard 120V AC outlet.

12 Volt DC Charging Method

Instructions for recharging the unit using a vehicle's 12V DC outlet.

Replacement Parts and Battery Disposal

Obtaining Replacement Parts

Information on how to contact for replacement parts.

Proper Battery Disposal

Guidelines for disposing of the sealed lead-acid battery responsibly.

Troubleshooting Common Problems

No Functions or Fault Codes

Addresses issues when the unit has no functions or displays fault codes.

Battery Connection and Voltage Issues

Troubleshooting poor battery connections or low voltage.

Sulfate or Unchargeable Battery

Guidance for dealing with sulfated or unchargeable batteries.

Overtime, Overheated, or Reverse Polarity

Resolving issues related to overtime charging, overheating, or incorrect polarity.

Specifications

Product Technical Specifications

Details technical specifications including boost ampere, battery type, and cables.