EasyManua.ls Logo

Black & Decker M-47 Series - Cleaning and Lubrication

Black & Decker M-47 Series
12 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CLEANING AND LUBRICATION
Use
only
mild
soap and a damp cloth
to
clean the tool.
Do
not
use turpen-
tine, gasoline, lacquer
or
paint thinner, dry cleaning fluids or similar products.
Never
let
any liquid get inside the toot, never immerse any part
of
the tool
into
a liquid.
Permanently lubricated bearings and gears are used in these units,
as
well
as
factory-installed oil reservoirs. No periodic lubrication is required.
In the unlikely event that this tool should ever require service, take
or
send
it
to
your nearest Black & Decker Service Centre
or
authorized repalr facili-
ty. Black & Decker Service Centre addresses
are
listed on the owner's registra-
tion card packed with your saw.
IMPORTANT
To
assure product safety and reliability, repairs, maintenance and adjustment
(other than those included in
this
manual) should be performed by Black &
Decker Service Centres
or
other qualified service organizations, always us-
ing Black
& Decker parts. When servicing Double Insulated tools,
USE
ON·
L Y IDENTICAL REPLACEMENT PARTS.
RAPID
EXCHANGE
HOME
USE
WARRANTY
Black
& Decker warrants
this
product
for
two
years against
defect
in
material and
workmanship in normal residential use. This
warranty does
not
cover dawnage resulting
from negligent handling,
misuse
or
lack
of
reasonable
care. Please return
the
com-
plete unit, transportation
prepaid.
to
the
seller
for
free
raplacement
if
the
seller
is
a
participating retailer
in
the Black &
Oeckel"
qpid
exchange
program. (Proof
of
purchase
may
be
required
by
the
seller.)
The
unit
may
also
be
nttumed
to
a
Black
& Decker ser-
vice centre
or
adhoriZ8d
semce
station
for
free replacement
or
repair
at
our
option.
This
warranty
does
not
apply to accessories.
In returning
the
tool
for
replacement, all original standard equipment must also be
returned
(for
example, chuck,
chuck
key, auxiliary handles, circular saw blades). Ex·
pendable original equipment such as sanding sheets,
belts
and
discs
and jig saw
blades need not be returned. For
kits
and assortments only the basic power
tool
will
be
replaced.
The sole remedy
for
breach
of
this
warranty and the sole obligation
of
Black & Decker
hereunder
is
the repair
or
replacement
of
the
defective product
at
Black & Decker's
option.
Black
& Decker shall have
no
liability whatsoever at any
time
for
any personal
injury
or
property damages
or
for
any special, indirect
or
consequential damages
of
any kind howsoever arising.
This warranty
is
strictly
limited
to
its
terms and is in lieu
of
any kind and all
other
war-
ranties and conditions, written
or
oral,
whethef
express
or
implied.
Note: This warranty and related provisions set
out
above may
not
be applicable in cer-
tain provinces
..
Form No. 741198-02
BLACK & DECKER CANADA INC.,
100
Central Ave.,
Brockville, Ontario
K6V
5W6
(AUG91-CD-1)
12
Copyright ©
1991
Black & Decker
Printed in U.S.A.
Product Made
in
U.S.A.

Related product manuals