Black & Decker NHT2218 - Troubleshooting; Slow Running, Noisy or Hot Blades; Unit Will Not Start; Battery Wont Charge

12
Imported by
Black & Decker (U.S.) Inc.,
701 E. Joppa Rd.
Towson, MD 21286 U.S.A.
TROUBLESHOOTING
Problem Possible Cause Possible Solution
• Slowrunning,noisyorhotblades. •Dry,corrodedblades.   •Lubricateblades.
      •Bladesorbladesupportbent.  •Straightenbladeorbladesupport.
      •Bentordamagedteeth.   •Straightenteeth.
      •Loosebladebolts.   •Tightenbladebolts.
•Unitwillnotstart.   •Batterynotinstalledproperly.  •Checkbatteryinstallation.
      •Batterynotcharged.   •Checkbatterychargingrequirements.
      •Lockoffnotfullyoperated.  •Checkthatlockoffisfullypulledbackpriorto
moving main trigger.
•Batterywon’tcharge.   •Batterynotinsertedintocharger.  •InsertbatteryintochargeruntilgreenLEDappears.
     •Chargernotpluggedin.   •Plugchargerintoaworkingoutlet.Referto
“Important Charging Notes” for more details.
           •Checkcurrentatreceptaclebypluggingina
lamp or other appliance.
           •Checktoseeifreceptacleisconnectedtoa
light switch which turns power off when you turn
out the lights.
      •Surroundingairtemperaturetoo  •Movechargerandtooltoasurroundingair 
hot or too cold. temperature of above 40 degree F (4.5°C) or
below 105 degree F (+40.5°C).
For assistance, visit our website www.blackanddecker.com for the location of the service center nearest you or call the BLACK &
DECKER help line at 1-800-544-6986.