Black & Decker Start-It VEC010BD User Manual

VEC010BD
KEY FEATURES:
• Rechargeable Jump-Start
System
• Easy-to-Read Charge
Indicators
• Emergency Area Light
• Keyless ON/OFF Power
Switch
• 12 Volt DC Accessory
Outlet
• Battery Status Check
USER’S MANUAL
& WARRANTY INFORMATION
IMPORTANT SAFETY INFORMATION, SAVE THESE INSTRUCTIONS
TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND
THIS INSTRUCTIONAL MANUAL. THIS MANUAL CONTAINS IMPORTANT
INFORMATION REGARDING THE OPERATION AND WARRANTY OF THIS
PRODUCT. PLEASE RETAIN FOR FUTURE REFERENCE.
www.vectormfg.com
4140 S.W. 30th Ave., Ft. Lauderdale, FL 33312 U.S.
Toll Free: (800) 618-5178
8
START-IT
Jump-Starter
12 Volt DC Power Supply
Cordless • Rechargeable
TWO YEAR LIMITED WARRANTY PROGRAM
This limited warranty program is the only one that applies to this product, and it sets forth all the
responsibilities of Vector Manufacturing, regarding this product. There is no other warranty, other than those
described herein.
This Vector Manufacturing product is warranted, to the original purchaser only, to be free of defects in
materials and workmanship for two years from the date of purchase without additional charge. The
warranty does not extend to subsequent purchasers or users. Vector Manufacturing will not be responsible
for any amount of damage in excess of the retail purchase price of the product under any circumstances.
Incidental and consequential damages are specifically excluded from coverage under this warranty.
This product is not intended for commercial use. This warranty does not apply to accessories or damage to
units from misuse or incorrect installation. Misuse includes wiring or connecting to improper polarity power
sources.
RETURN/REPAIR POLICY: Defective products, other than accessories, may be returned postage prepaid to
manufacturer. Any defective product, other than accessories, that is returned to manufacturer within 30 days
of the date of purchase will be replaced free of charge. If such a product is returned more than 30 days
but less than two years from the purchase date, manufacturer will repair the unit or, at its option, replace it
free of charge. If the unit is repaired, new or reconditioned replacement parts may be used, at Vector
Manufacturing’s option. A unit may be replaced with a new or reconditioned unit of the same or
comparable design. The repaired or replaced unit will then be warranted under the terms of the remainder
of the warranty period. The customer is responsible for the shipping charges on all returned items after 30
days. During the warranty period, manufacturer will be responsible for the return shipping charges.
LIMITATIONS: This warranty does not cover accessories, bulbs, fuses and batteries, defects resulting from
normal wear and tear (including chips, scratches, abrasions, discoloration or fading due to usage or
exposure to sunlight), accidents, damage during shipping to our service facility, alterations, unauthorized
use or repair, neglect, misuse, abuse, failure to follow instructions for care and maintenance, fire, flood and
Acts of God.
If your problem is not covered by this warranty, call our Technical Support Department toll free at
(800) 618-5178 for general repair information and charges if applicable. You may also contact us through
our website at www.vectormfg.com.
STATE LAW RIGHTS: This warranty gives you specific legal rights. Some states do not allow limitations on
how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages,
so the exclusions or limitations stated herein may not apply. This warranty gives the purchaser specific legal
rights; other rights, which vary from state to state, may apply.
TO REQUEST WARRANTY SERVICE FOR THIS PRODUCT: Contact Vector Manufacturing Technical Support
by telephone, fax or mail (see below). We suggest that you keep the original packaging in case you need
to ship the unit. When returning a product, include your name, address, phone number, dated sales receipt
(or copy) and a description of the reason for return and product serial number. After repairing or replacing
the unit, we will make every effort to return it to you within four weeks.
WARRANTY ACTIVATION: Please complete Warranty Activation Card and mail to Vector Manufacturing.
Enter “VEC010BD” as Model and “Jump-Starter” as Product Type. All Vector Manufacturing products must
be registered within 10 days of purchase to activate this warranty. Mail the completed registration form,
along with a copy of the original sales receipt to:
ATTN.: CUSTOMER SERVICE
4140 SW 30th Ave., Ft. Lauderdale, FL 33312
• TOLL FREE: (800) 618-5178 • FAX: (954) 584-5556 •
BD42905
© 2005 VECTOR MANUFACTURING
MADE IN CHINA
Vec010BD_Manual_042905 5/9/05 1:00 PM Page 8

Black & Decker Start-It VEC010BD Specifications

Power

battery_voltage	12 volt
battery_capacity	9 amp/hour
instant_amps	300 amps

Battery

battery_type	AGM, sealed, lead-acid
battery_protection	5 amps, self-resetting breaker
5_second_amp	225 amps

Summary

Warranty Information

Two Year Limited Warranty Program

Details the warranty terms, exclusions, and responsibilities of Vector Manufacturing for the product.

Return/Repair Policy

Outlines procedures for returning defective products for replacement or repair within the warranty period.

Warranty Limitations

Lists conditions not covered by the warranty, such as normal wear, misuse, and accidental damage.

Requesting Warranty Service

Provides instructions on how to contact customer support and what information is needed for warranty claims.

Product Overview

Key Features

Highlights the main functionalities and components of the Black & Decker Jump-Starter.

Important Safety Callout

Crucial safety instructions to read and understand before operating the product.

Detailed Safety Instructions

General Safety Precautions

Essential safety measures for working with lead-acid batteries, charging, and operating the jump-starter.

First Aid Procedures

Immediate first aid steps for skin or eye contact with battery acid.

Operational Cautions

Advises on safe operating practices, charging limits, and avoiding damage to the unit or connected devices.

Introduction and Features

Product Introduction

Welcomes the user and highlights the jump-starter's capabilities and design for optimum performance.

Key Product Features List

Lists the main functionalities and components of the Black & Decker Jump-Starter, such as safety switch, LED indicators, and clamps.

Using the Jump-Starter

Jump-Starting a Vehicle

Step-by-step instructions for connecting and using the jump-starter to start a vehicle with a negative or positive ground system.

Component Identification

Identifies key parts of the unit like the accessory outlet, recharge port, battery status indicators, and power switches.

Vehicle Applications

Lists common vehicles and devices that can be jump-started or powered by the unit.

Portable Power Supply and Maintenance

Using as a 12V DC Power Supply

Explains how to use the unit to power 12V DC accessories and lists estimated operation times for various devices.

Estimated 12V DC Operation Times

Provides a table showing estimated operating times for different appliances based on their power usage.

Care and Maintenance Guidelines

Advises on keeping the battery charged, cleaning the unit, and routine maintenance for longevity.

Charging and Recharging Procedures

Details how to recharge the unit using AC or DC adapters, including specific time limits and indicators.

DC Recharging and Disposal

DC to DC Recharging

Explains the process and precautions for recharging the unit using a vehicle's 12V DC accessory outlet.

Replacement Parts and Cleaning

Information on obtaining replacement parts and cleaning the unit's cables and connectors.

Battery Disposal Instructions

Guides on proper disposal and recycling of the sealed lead-acid battery, including safety warnings.

Troubleshooting and Specifications

Troubleshooting Common Issues

Provides solutions for problems like the unit failing to jump-start or the 12V outlet shutting off.

Product Specifications

Lists technical details of the jump-starter, including clamp types, cable gauge, and protection ratings.