EasyManua.ls Logo

Black & Decker TR117 - User Manual

Black & Decker TR117
32 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
1
HEDGE TRIMMER
INSTRUCTION MANUAL
Model Numbers TR116, TR117
SAVE THIS MANUAL FOR FUTURE REFERENCE.
VEA EL ESPAÑOL EN LA CONTRAPORTADA.
POUR LE FRANÇAIS, VOIR LA COUVERTURE ARRIÈRE.
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y
PÓLIZA DE GARANTÍA. ADVERTENCIA: LÉASE ESTE
INSTRUCTIVO ANTES DE USAR EL PRODUCTO.
Thank you for choosing Black & Decker! Go
to www.BlackandDecker.com/NewOwner
to register your new product.
PLEASE READ BEFORE RETURNING
THIS PRODUCT FOR ANY REASON:
If you have a question or experience a problem with your
Black & Decker purchase, go to
WWW.BLACKANDDECKER.COM/INSTANTANSWERS
for instant answers 24 hours a day.
If you canʼt find the answer or do not have access to the internet,
call 1-800-544-6986 from 8 a.m. to 5 p.m. EST Mon. - Fri
to speak with an agent.
Please have the catalog number available when you call.
KEY INFORMATION YOU SHOULD KNOW:
• To insure extension cord does not come loose see
figure C for proper attachment.
• In order to operate the trimmer, the lock button must first
be pulled back (see figure D) then squeeze trigger.
90572204 TR116, TR117 manual.qxd: chainsaw booklet new 8/16/11 10:14 AM Page 1

Table of Contents

Questions and Answers

  • S
    Stephanie WallaceAug 5, 2025
    What to do if my Black & Decker Trimmer will not start?
    • H
      hcoffeyAug 5, 2025
      If your Black & Decker Trimmer won't start, there are several things to check: * Ensure the lock-off is fully forward before moving the main trigger. * Make sure the cord is plugged into a working outlet. * Replace the circuit fuse if it's blown. If the fuse repeatedly blows, stop using the trimmer and have it serviced. * Reset the circuit breaker if it's tripped. If the breaker repeatedly trips, discontinue use and have the trimmer serviced. * If the cord or switch is damaged, have it replaced at a Black & Decker Service Center or Authorized Servicer.
  • B
    bnielsenAug 21, 2025
    Why are the blades on my Black & Decker TR117 running slow, noisy, or hot?
    • J
      Julia VelasquezAug 21, 2025
      If the blades of your Black & Decker Trimmer are running slowly, are noisy, or getting hot, it could be due to several reasons: * The blades may be dry or corroded: Lubricate the blades. * The blades or blade support might be bent: Straighten the blade or blade support. * The teeth could be bent: Straighten the teeth. * The blade bolts may be loose: Tighten the blade bolts.

Summary

Safety Guidelines and Warnings

Safety Definitions

Explains safety alert symbols used in the manual.

General Power Tool Safety

Provides essential safety rules for all power tools.

Hedge Trimmer Specific Safety

Specific safety precautions for operating the hedge trimmer.

Product Setup and Usage

Product Components

Identifies and labels the parts of the hedge trimmer.

Extension Cord Guidelines

Details correct extension cord selection and usage.

Assembly and Cord Attachment

Steps for attaching the guard and extension cord retainer.

Operating the Trimmer

Instructions on how to turn the hedge trimmer on and off.

Trimming Techniques and Maintenance

Trimming Guidance

Guides on working position, cord management, and cutting.

Maintenance and Service

Procedures for cleaning, blade care, service, and warranty.

Troubleshooting Guide

Troubleshooting

Lists common problems, their causes, and solutions.

Black & Decker TR117 Specifications

General IconGeneral
BrandBlack & Decker
ModelTR117
CategoryTrimmer
LanguageEnglish

Related product manuals