EasyManuals Logo

Black Box ServSwitch ACU4001A User Manual

Black Box ServSwitch ACU4001A
41 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #28 background imageLoading...
Page #28 background image
TROUBLESHOOTING
27
4.5 General Questions
The green power LED is not lit when I connect my Local Unit to my USB hub.
Local Units normally take power from the USB connection to the computer. Local
Units may require an external 5V PSU:
- If the CPU/hub cannot provide sufficient power through the USB connection.
- For video only applications.
Contact Technical Support for details of a suitable PSU.
Is it possible to use a cable length longer than 150ft (50m)?
The maximum extension distance is nominally 150ft (50m). Some systems may
extend up to 180ft (60m) and others only 120ft (40m). Once the system range limit
is reached, USB operation will cease or become erratic. For maximum extension
distance, avoid connecting additional USB hubs to the system.
Which interconnection cable is best?
In electrically ‘quiet’ environments, UTP cable will give the best quality video over
long distances because it has less capacitance per unit length. However, it is more
prone to electrical noise and interference. In environments where this is likely to be
a problem, use STP/FTP cable, ensuring that the shield connection is maintained
between the Extender units.
Can I use CATx patch cables?
Yes, but to ensure maximum data integrity, use as few as possible. The maximum
patch cable length at each end of the link should be limited to 9ft (3m).
Can the extender system be used between buildings?
No. Ground loops could damage the extender system and attached equipment.
Can multiple Local/Remote Units be used by swapping the interconnection cable?
Local units provide a transparent USB link, so it is possible to swap or switch the
Local-Remote interconnection to create a matrix-switch system. Please call
Technical Support before deploying such a system.
Can the extender be connected into our network?
Absolutely not. Regardless of the cable similarities, the data signals and voltages
used by the extender are different to those used by Ethernet and other types of
networks. Connecting the extender to a LAN hub, switch, repeater, or other
network device, or exposing it to the signal levels present on network data lines
may damage the extender and other devices.

Other manuals for Black Box ServSwitch ACU4001A

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Black Box ServSwitch ACU4001A and is the answer not in the manual?

Black Box ServSwitch ACU4001A Specifications

General IconGeneral
BrandBlack Box
ModelServSwitch ACU4001A
CategoryExtender
LanguageEnglish

Related product manuals