17
CHAPTER 2: Introduction
2.4 Safety Concerns
As you prepare to install the ServSwitch Wizard Extender, please keep these things
in mind:
• The Extender is for use in dry, oil-free indoor environments only.
• Make sure that the rated current draw in amperes of all of the devices plugged
into the same extension cord, outlet, or circuit as your Extender equipment
does not exceed the rated current in amperes of the cord, outlet, or circuit.
• Do not attempt to service the Extender yourself. Instead, call Black Box
Technical Support as described in Section 7.6.
These issues involve the power adapter included with the Extender receiver or
Extender Chassis Power Supply:
• Warning: The power adapter contains no user-serviceable parts, but it does
contain parts capable of delivering hazardous electric shocks. Do not attempt
to dismantle it!
• Plug the power adapter into a socket outlet close to the module it is powering.
• Do not use the power adapter if its case becomes damaged, cracked, or
broken, or if you suspect that it is not operating properly.
• If the power adapter stops working, replace it with a manufacturer-approved
adapter of the same type only.
To Next Page
Loading...
Need help?
General