Black Box ServSwitch ServView 17 Series User Manual

ServView 17 Enterprise KVM Drawer
15
3.2 Password
■ Enable password.
■ Set your own user name & password.
■ Change your password.
■ Enable password.
The password is disabled by default (i.e. There is no password required when you power on
the KVM switch for the first time)
1. Enter the KVM hotkey Scroll Lock + Scroll Lock + U
2. Logout of the KVM switch by entering the hotkey Scroll Lock + Scroll Lock + P
3. In SUPERVISOR level, enter “00000000” eight zeros in the user name & password field
(Do not use the “0” on the number pad)
4. In USER level, enter Space bar + Enter in the user name & password field
Note: Automatic logout after 10 minutes of inactivity
1. Login to the KVM switch in SUPERVISOR level by entering “00000000” eight zeros in user name &
password field.
2. Call the KVM OSD menu by entering the KVM hotkey Scroll Lock + Scroll Lock + Space Bar.
3. Enter F1 to view the MAIN MENU.
4. Select “USER SECURITY”.
5. Set password in SUPERVISOR & USER level.
a. In the top-left row “S” (SUPERVISOR), press Enter to set your own user name & password.
b. In the row 1 to 8 (USER), press Enter to set your own user name & password.
6. Press Enter to save the settings or press Esc to cancel without saving.
Note: a. Blank has an underscore, while SPACE does not.
b. Enter any alphanumeric key to move to next input item. SPACE is treated as a valid character.
1. Login to the KVM switch in SUPERVISOR level by entering your own user name & password.
2. Call the KVM OSD menu by entering the KVM hotkey Scroll Lock + Scroll Lock + Space Bar.
3. Press F1 to view the MAIN MENU.
4. Select “USER SECURITY”.
5. Change the password in SUPERVISOR & USER level.
a. In the top-left row “S” (SUPERVISOR), press Enter to change your user name & password.
b. In the row 1 to 8 (USER), press Enter to change your user name & password.
6. Press Enter to save the setting or press Esc to cancel without saving.
Note: a. Blank has underscore, while SPACE does not.
b. Enter any alphanumeric key to move to next input item. SPACE is treated as a valid
character.
1. Enter the KVM hotkey Scroll Lock + Scroll Lock + U.
2. Logout of the KVM switch by entering the KVM hotkey Scroll Lock + Scroll Lock + P.
3. Following this you will not need a user name & password to access the KVM OSD menu.
■ Forget your password.
1. Please contact Black Box for further support.
Note:
■ You must enter the KVM hotkey within 2 seconds.
■ A beep sound will be heard once you have successfully entered the hotkey.

Black Box ServSwitch ServView 17 Series Specifications

General

Brand	Black Box
Model	ServSwitch ServView 17 Series
Category	Music Mixer
Language	English