ServView 17 Enterprise KVM Drawer
30
Video Settings Panel
■ Brightness
Controls the brightness of the picture.
■ Contrast
Controls the contrast of the picture.
■ Clock
Defines the horizontal frequency. Different video card types may require different
values here. The default settings set by the auto adjustment procedure should be
adequate for all common configurations. If the picture quality is still bad after auto
adjustment you can change this setting together with the sampling phase to achieve a
better quality.
■ Phase
Defines the phase for video sampling, used to control the display quality
together with the setting for clock sampling.
■ Horizontal Position
Use the left and right buttons to move the picture in a horizontal direction while this
option is selected.
■ Vertical Position
Use the left and right buttons to move the picture in a vertical direction while this
option is selected.
■ Reset this Mode
Reset mode specific settings to the factory defaults.
■ Reset all Modes
Reset all settings to the factory defaults.
To Next Page
Loading...
Need help?
General