ServView 17 Enterprise KVM Drawer
38
The following information has to be given to mount the image properly:
Share host The server name or IP address
Share name The name of the share to be used
Path to image The name of the image file on the share
User (optional) If necessary, specify the user name for the share
If unspecified and a guest account is activated this guest account
will be used as your login.
Password (optional) If necessary, specify the password for the given user name. To
register the specified file image and its location click on “Set”
button.
The specified image file must be accessible from the IP-KVM switch and the correct IP address
and device names must be given. Otherwise the IP-KVM switch will not be able to access the
referenced image file.Also, the specified share must be configured correctly. Administrative
permissions will be required. You should either login as a system administrator (or as “root”
on UNIX systems), or ask your system administrator for help to complete this task.
Windows 2000/XP
Open the Explorer, navigate to the directory (or share), and press the right mouse button to
open the context menu.
Explorer Context menu
Select “Sharing” to open the configuration dialogue.
To Next Page
Loading...
Need help?
General