Black Box ServSwitch Wizard ACU5050A-R2 - Page 12

ServSwitch Wizard VGA/USB
724-746-5500 | blackbox.com
Page 12
3.2.1.2 USB connections
IMPORTANT: The Wizard VGA/USB can be used with other USB hubs in the system, but please note that due to power con-
straints, the local unit should not be connected to the downstream port of a bus-powered USB hub. Additionally, Wizard VGA/
USB dual-variant local units must always be powered using their supplied power adapter. Please see section 3.2.1.5 Local module
power for details.
1 Use the supplied USB cable to link the USB socket of the local module to a vacant USB socket on the computer as shown in
Figure 3-7:
LOCAL
OU T
IN
IN
S e r
B
Figure 3-7. Attaching the USB link cable to the single- and dual-variant local modules
LOCAL
OU T
A
B
IN
IN IN
S e
B