ARIA and ALBA KNX Keypad Panels - Operation and Maintenance Manual
Page 14/21
Activate LED indication during touch according to the function status
●
Special function
Links with DND and MUR objects
Always ON or OFF
Light selector
Shutters selector
Light master
Shutters master
Fan speed 1, 2, 3, or AUTO
FCU ON/OFF
Set the indicator status according to status value
0=OFF, 1=ON or 0=ON, 1=OFF
Sets the LED status after power on
Set the active LED color, a custom value can be specified using HEX color code
Set the inactive LED color, a custom value can be specified using HEX color code
Enables the smooth color change effect of the LED
Time interval of increased backlight after button press
Ignore sleep and standby modes
The button backlight will never go to sleep or standby mode if it is enabled
Individual brightness control
Individually adjust the brightness levels (On, Off, Burst, Standby, Sleep)
To Next Page
Loading...
