Black Stone 1940 - Griddle Assembly Instructions; Initial Frame and Panel Assembly

! WARNING
The manufacturer has made
every eort to eliminate any
sharp edges. However, you
should handle all compo-
nents with care to avoid
accidental injury.
Some parts may contain
sharp edges, especially
as noted in these instruc-
tions. Wear protective
gloves if necessary.
! WARNING
The use of alcohol, prescrip-
tion or non-prescription
drugs may impair the
consumer’s ability to prop-
erly assemble or safely
operate the appliance.
! CAUTION
Two people are recom-
mended for the assembly
of this product.
ASSEMBLY INSTRUCTIONS
Please read all instructions thoroughly before proceeding. Make sure all
the plastic packing material is removed before assembling
Find a large, clean area to assemble your griddle. Please refer to the parts list
and assembly diagrams as necessary.
Griddle assembly involves large components; therefore, it is advised to have
two people assemble the unit.
STEP 
Remove the griddle body from the packaging and lay it upside
down. Install one (1) upper right leg, one (1) le leg, and the front panel with
four (4) M6x12 screws. (Do not tighten these screws yet.)
STEP 
Install one (1) le leg, one (1) upper right leg, and the back panel
with four (4) M6x12 screws. (Do not tighten these screws yet.)
TOOLS NEEDED: Phillips Head
Screwdriver & Adjustable Wrench
STEP 
Remove the two lower
right legs from the box and insert
them into the upper right legs.
Model 1940 | Owner’s Manual | | Owner’s Manual | Model 1940
08 09
Assembly Guide Assembly Guide