Black Stone 2015 - Page 20

ENGLISHENGLISH
Owner’s Manual |
blackstoneproducts.com/support
ENGLISH
Section 02
GAS FLOW
SYMPTOMS
01. A ame is coming out of the air gate.
SYMPTOMS
01. Burner ames are yellow or irregular.
POSSIBLE CAUSES SOLUTION
01. Something is blocking the venturi
in the burner tube. This is not
allowing the propane to ow
through the burner, causing the
ame to back out the air gate.
Clean the burner assembly to remove
the obstruction. (Please reference the
Cleaning the Burner Assembly section
of the Care & Maintenance chapter.)
POSSIBLE CAUSES SOLUTION
01. Something is blocking the
air gate for the burner. This is
blocking oxygen from mixing
with the propane correctly to get
healthy ames.
Check the air gates in your burner. If
you have adjustable air shutters over
your air gates, make sure that they are
completely open. If your burners have
bug shields, clean any spider webs, soot,
or debris o the bug shield. Clean any
other obstructions out of air gates.
TECHNICAL SUPPORT:
Scan QR code for more videos or visit the
Blackstone YouTube channel at
youtube.com/blackstonegriddles
Troubleshooting Model 2015
16