ENGLISH
BLACKSTONEPRODUCTS.COM/SUPPORT
OWNER’S MANUAL | ASSEMBLY GUIDE MODELS:
STEP 09
Use three (3) M6x15 screws [a.] to attach the right drawer
panel to the cart base.
STEP 10
Align the holes on the drawer heat shield with the holes on
the left and right drawer panels.
STEP 07
Use four (4) M5x10 screws [b.] to attach the left drawer panel
and right drawer panel to the back panel.
STEP 08
Use three (3) M6x15 screws [a.] to attach the left drawer
panel to the cart base.
To Next Page
Loading...
