‘Video Preview’ preferences
If you work with unsupported or non standard frame sizes, these can also be correctly
outputted by your Blackmagic Design hardware. Go to preferences > video preview and click
the ‘setup’ button next to ‘Blackmagic playback’. The ‘Blackmagic device selection’ window will
appear. You can scale your image up or down to the next closest video standard supported by
your hardware. For example, if you are using UltraStudio 4K and your After Effects composition
is set to a resolution of 2048 x 1152, scaling down will output DCI 2K, scaling up will
output Ultra HD.
Rendering
When you have completed your composition, you can render a DPX image sequence or any of
the following codecs:
‘Output Module Settings’ rendering options
33Using your Favorite 3rd Party Software
To Next Page
Loading...
Need help?
General
