5 Power your computer and turn it on. After your computer’s start up sequence an alert
window will appear asking you to update the card.
Click ‘update’.
A progress bar will indicate the update process and will let you know when the update
is complete.
Once complete, disconnect the USB cable and reinstall the card into your computer’s
PCIe slot.
NOTE Don’t forget to shut down your computer and disconnect power before
accessing the PCIe slot.
With your card reinstalled you can now power your computer. The DeckLink card will be
recognized by your computer and you can continue with your production.
75Recovering a DeckLink Card from an Interrupted Update
To Next Page
Loading...