Blackmagic Design - Leading the creative video revolution
™
Multibridge
Windows XP
™
Mac OS X
™
Multibridge Utility Requirements
Supported systems
Microsoft Windows XP™ service pack 1 or later.
Mac OS X™ 10.3 and 10.4.
USB 1.1 and USB 2.0.
Environment
The intended use is for commercial and industrial controlled environments.
The unit should not be exposed to extreme enviroments including moisture,
dirt, heat or light.
For installation in an OBV (outside broadcast vehicle) the unit should be
rack-mounted to avoid extended periods of vibration.
Power connectors are located at the front and rear of the unit for your
convenience.
Warning
Do not disconnect power or USB cables while firmware is being updated.
It is vital the firmware update process is completed without malfunction.
Stable operating conditions should be maintained to guarantee usability.
Solid copper-core HD-SDI cables will work reliably over 300 feet or 100
meters. Cables should be shielded and installed away from power supplies,
generators or other potential EMF sources.
5
To Next Page
Loading...
