Need help?Do you have a question about the Blackmagicdesign Smart Remote 4 and is the answer not in the manual?
General| Type | Remote control |
|---|---|
| Connection | Ethernet |
| Relative Humidity | 0% to 90% non-condensing |
| Compatibility | Blackmagic Design devices |
| Operating Systems | Windows, macOS |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 45°C |
| Functions | Control ATEM switchers, assignable buttons |
| Connector | Ethernet |
Instructions for powering the Ultimatte 12 and Smart Remote 4 units.
How to connect the Smart Remote 4 to the Ultimatte 12 via Ethernet.
Details on connecting SDI inputs and outputs for foreground, background, and mattes.
Overview of the Smart Remote 4's touchscreen interface and physical controls.
How to configure the IP address for the Ultimatte 12 main unit.
Configuring the IP addresses of Ultimatte main units within the Smart Remote 4.
How to set the backing color (green, red, or blue) for matte generation.
Adjusting matte density to ensure opacity and prevent background show-through.
Fine-tuning matte properties like density, black gloss, and color density.
Making adjustments to luminance, color, contrast, and saturation for sources.
Process for updating the Ultimatte 12 main unit's internal software.
Steps for updating the Smart Remote 4's software.
Important safety precautions for using the equipment, including electrical and environmental advice.
Details of the product's warranty period, coverage, and limitations.
To Next Page