You have now adjusted the matte density setting.
To exit Telnet:
Hold down the control button and press the ‘]’ key. The Telnet prompt will appear.
Type the following:
quit(press enter)
A status message will appear confirming the connection is closed.
Blackmagic Ultimatte 12 Ethernet Protocol
Version 1.0
If you are a software developer you can use Ultimatte 12 Ethernet Protocol to construct devices that
integrate with our products. Here at Blackmagic Design our approach is to open up our protocols
and we eagerly look forward to seeing what you come up with!
Overview
The Blackmagic Ultimatte Ethernet Protocol is a text based protocol that is accessed by connecting
to TCP port
9998 on an Ultimatte.
Ultimatte sends information in blocks which each have an identifying header in all caps, followed by
a full colon. A block spans multiple lines and is terminated by a blank line. Each line in the protocol is
terminated by a newline character.
Upon connection, Ultimatte sends a complete dump of the state of the device. After the initial status
dump, status updates are sent every time Ultimatte’s status changes.
To be resilient to future protocol changes, clients should ignore blocks they do not recognize, up to
the trailing blank line. Within existing blocks, clients should ignore lines they do not recognize.
Protocol Preamble
The first block sent by Ultimatte is always the protocol preamble:
PROTOCOL PREAMBLE:
↵
Version: 1.0
↵
↵
The version field indicates the protocol version. When the protocol is changed in a compatible way,
the minor version number will be updated. If incompatible changes are made, the major version
number will be updated.
Device Information
The next block contains general information about the connected Ultimatte device.
DEVICE:
↵
Model Name: Blackmagic Ultimatte 12
↵
Friendly Name: Ultimatte 12
↵
Software Version: 1.0
↵
Video Format: 1920x1080p 60
↵
Reference Source: Foreground
↵
BG In: Locked
↵
BG MATTE In: Locked
↵
G MATTE In: Locked
↵
FG In: Locked
↵
MONITOR In: Locked
↵
H MATTE In: Locked
↵
LAYER In: Locked
↵
LAYER MATTE In: Locked
↵
REF In: Locked
↵
↵
248248Informationen für Entwickler
To Next Page
Loading...
Need help?
General
