Blackmagicdesign Smart Remote 4 - Page 249

Network Information
NETWORK:
↵
DHCP: Off
↵
IP Ad d r ess: 10.0.0.2
↵
Su b net M as k: 255.255.255.0
↵
Gateway: 10.0.0.1
↵
↵
Initial Status Dump
The next nine blocks provide the control values, control default values, current file, file list and the
GPI lists.
CONTROL:
↵
Matte Density: 0
↵
Red Density: 0
↵
Green Density: 0
↵
...(Full list in Controls section)
↵
CONTROL DEFAULT:
↵
Matte Density: 0
↵
Red Density: 0
↵
Green Density: 0
↵
...(Full list in Controls section)
↵
CURRENT FILE:
↵
Filename
↵
↵
FILE LIST:
↵
File 1
↵
File 2
↵
↵
GPI LIST:
↵
ID: 1
↵
Index: 0
↵
File 1
↵
File 2
↵
↵
End Prelude
The final block of the status dump sent by Ultimatte is always end prelude:
GPI LIST:
↵
EN D PRELU DE:
↵
↵
NOTE Ultimatte 12 supports 5 GPI inputs so there would be 5 GPI List blocks
dumped with ID’s
1-5
249249Informationen für Entwickler