What to do if my Black+Decker Drill battery pack will not charge?
If the Black+Decker Drill battery pack won't charge, ensure the charger is plugged into a working outlet. Also, the surrounding air temperature may be too hot or too cold. Move the charger and battery pack to a location where the air temperature is above 40 degrees F (4.5ºC) or below 105 degrees F (40.5ºC).
Why does my Black+Decker Drill shut off abruptly?
If your Black+Decker Drill shuts off abruptly, it could be because the battery pack has reached its maximum thermal limit or is out of charge. Allow the battery pack to cool down, then place it on the charger and let it charge.
General| Brand | Black+Decker |
|---|---|
| Model | BCD003 |
| Category | Drill |
| Language | English |
Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow may result in electric shock, fire and/or serious injury.
Keep work area clean, do not operate in explosive atmospheres, keep children and bystanders away.
Power tool plugs must match outlet, avoid body contact with earthed surfaces, do not expose to rain or wet conditions.
Stay alert, watch what you are doing, use common sense, use protective equipment like eye protection.
Do not force the tool, use correct tool for application, do not use if switch is faulty, disconnect power before adjustments.
Recharge only with specified charger, use only with designated battery packs, keep away from metal objects.
Have tool serviced by qualified person using identical replacement parts. Never service damaged battery packs.
Wear ear protectors during impact drilling. Brace the tool properly. Hold by insulated gripping surfaces.
Never operate at higher speed than drill bit rating. Start drilling at low speed. Apply pressure in line with bit.
Secure workpiece, wear gloves if parts get hot, avoid air vents, wear safety goggles, wear ear protectors.
Appliance can be used by children aged 8+ and persons with reduced capabilities with supervision.
Risks include touching moving parts, prolonged use, hearing impairment. Assess vibration exposure for safety measures.
Symbols shown on the tool along with the date code.
Never open batteries, do not expose to water or heat. Use correct charger and battery packs. Avoid damage.
This tool includes features like Variable speed switch, Forward/reverse slider, Torque adjustment collar, Keyless chuck.
Battery needs charging before first use. Charge at ambient temps between 10-40°C. LED indicates charging status.
Engage lock-off button before installing/removing. Insert battery pack until audible click, depress release button to remove.
Trigger switch turns tool ON/OFF. Speed depends on trigger depression. Reversing button determines direction.
Torque adjustment collar sets torque for tightening screws. Higher torque for large screws/hard materials.
Engage lock-off button. Grasp rear half of chuck, rotate front half counterclockwise to insert bit, clockwise to tighten.
Dual range feature allows shifting gears for speed/torque. Select low speed/high torque or high speed/low torque.
Select forward/reverse rotation. Press switch to turn on, release to turn off. Speed depends on trigger pressure.
Use sharp bits, support work, use safety equipment, secure work area, run slowly, apply pressure, hold firmly.
Use sharp twist drill bits or spade bits. Pull out frequently to clear chips.
Use cutting lubricant for metals, except cast iron and brass which should be drilled dry.
Set collar to hammer drilling position. Slide speed selector to 2nd gear.
Use correct bit size. Lubricate if screws are difficult. Hold tool and bit straight with screw.
Lists common problems like unit not starting or battery not charging and their possible causes/solutions.
Caused by battery pack reaching thermal limit or being out of charge. Allow to cool or recharge.
Tool designed for long operation with minimum maintenance. Clean ventilation slots and motor housing.
Dispose of products and batteries separately. Recycle electrical products and batteries according to local provisions.
Provides specifications for the tool and charger, including voltage, speed, torque, capacity, and dimensions.
Black & Decker offers a 24-month guarantee from date of purchase. Claim must be in accordance with terms and conditions.
To Next Page
