16 • ENGLISH
the dust port (3). Ensure the longer side (8) of the
canister opening is on the top side of the port.
f Slide the canister onto the dust port and turn the
canister clockwise to lock it in place as shown in the
insert of Fig. D.
f To remove, turn the canister counterclockwise and
slide the canister off.
f To empty the canister, remove it from the dust port
and dump the sanding debris into an appropriate trash
receptacle.
MAINTENANCE
Use only mild soap and damp cloth to clean the tool.
Never let any liquid get inside the tool; never immerse any
part of the tool into a liquid.
Important! To assure product SAFETY and
RELIABILITY, repairs, maintenance and adjustment (other
than those listed in this manual) should be performed
by authorized service centers or other qualified service
personnel, always using identical replacement parts.
ACCESSORIES
Recommended accessories for use with your tool are
available from your local dealer or authorized service center.
Warning! The use of any accessory not recommended
for use with this tool could be hazardous.
PROTECTING THE ENVIRONMENT
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your BLACK+DECKER
product needs replacement, or if it is of no further
use to you, do not dispose of it with household
waste. Make this product available for separate
collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials. Local regulations may provide for
separate collection of electrical products from the
household, at municipal waste sites or by the
retailer when you purchase a new product.
SERVICE INFORMATION
BLACK+DECKER offers a full network of company-
owned and authorized service locations. All
BLACK+DECKER Service Centers are staffed with
trained personnel to provide customers with efficient and
reliable power tool service. For more information about
our authorized service centers and if you need technical
advice, repair, or genuine factory replacement parts,
contact the BLACK+DECKER location nearest you, or
visit us at www.BlackandDecker-la.com
ESPECIFICAÇÕES
RANDOM SHEET
SANDER
BDERO100
TYPE AR B2C B3 B2 BR
Voltage V 220 220 120 220 127
Frequency
Hz 50 50 60 60 60
Power
W 180 180 200 180 200
No-load speed
.../min
(opm)
12000
To Next Page
Loading...
Need help?
General
