Black+Decker BEG010 - Accessories and Data; Accessory Charts and Technical Data

12
ENGLISH
(Original instructions)
Sanding Flap Discs
Type 27 guard Type 27 guard
Hubbedsandingapdisc
Unthreadedbackingange
non-hubbedsandingap
disc
Threaded clamp nut
Type 41 Cutting Wheels
Type 41 guard Type 41 guard
Backingange Backingange
Abrasive cutting wheel Diamond cutting wheel
Clamp nut Clamp nut
Wire Wheels
Type 27 guard Type 27 guard
3 inch wire cup brush 4 inch wire cup brush
Sanding Discs
Rubber backing pad
Sanding disc
Threaded clamp nut
Protecting the environment
Z
Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste.
Products and batteries contain materials that can be
recovered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions. Further information is available at
www.2helpU.com
Technical data
BEG010 Type 1
Input voltage V
AC
230
Power input W 710
Rated speed min
-1
12000
Disc bore mm 22