Black+Decker BEMW471BH User Manual

www.blackanddecker.eu
1
5
2
3
4
6
7
8
10
9
11
12
13
BEMW461BH
BEMW471BH
BEMW481BH

Black+Decker BEMW471BH Specifications

General

Type	Electric Lawn Mower
Power Source	Corded Electric
Power	12 Amp
Collection System	Bag
Amperage	12 A
Cutting Width	17 in

Summary

Intended Use

Safety Instructions

Training

Read instructions, understand controls, and know proper use.

Preparation

Wear suitable footwear, inspect area, remove objects before use.

Operation

Use with guards, in daylight, avoid rain, and handle carefully.

Maintenance and Storage

Additional Safety Instructions

Extension Cable Use

Use approved outdoor extension cable, check for damage, unwind fully.

Operating Posture

Grip handle firmly, maintain position when tilting mower.

General Operation Precautions

Mowing Technique

Avoid backward mowing, direct discharge safely, clear area.

Safety Device Integrity

Ensure all guards and safety devices are in place and working.

Vibration Information

Safety of Others and Residual Risks

User Limitations

Not for persons with reduced capabilities unless supervised.

Residual Risks

Potential injuries from moving/hot parts, prolonged use, hearing.

Assembly

Grass Collection Box Assembly

Assemble grass box components: lid, sides, and bottom.

Handle Fitting

Fit lower and upper handles using knobs, washers, and screws.

Motor Cable Securing

Fix the motor cable with a restraint clip below the handle knob.

Grass Box Fitting

Place grass collection box, fitting recesses over lugs.

Proper Hand Position

Use proper hand position for safety during operation.

Adjusting Height of Cut

Switching On and Off

Mowing Guidance

Cable Management

Use cable management system to keep cord away from blade.

Edge Cutting

Cut grass right up to the edge of a wall or fence.

Blade Maintenance

Removing and Installing Blade

Safely remove and install blade using wood block and wrench.

Blade Sharpening

Keep blade sharp for clean cuts, use eye protection.

Cleaning and Lubrication

Blade Balancing

Balance blade by filing ends until it remains level.

Cleaning Procedure

Clean mower with mild soap and damp cloth, check fasteners.

Troubleshooting

Mower Will Not Start

Check cord, fuse, or outlet; allow thermal cutout to reset.

Intermittent Function

Increase height of cut if machine functions intermittently.

Ragged Finish

Check blade sharpness, underside for blockage, or blade orientation.

Protecting the Environment

Technical Data and Declarations

Technical Specifications

Details voltage, power input, speed, height adjustment, blade length, weight.

EC Declaration of Conformity

Product compliance with Machinery and Noise Directives.

Guarantee Information