ENGLISH
(Original instructions)
7
pour out the water.
CLEANING
♦ Disconnect the appliance from the mains and allow it to
cool before undertaking any cleaning task.
♦ Clean the equipment with a damp cloth with a few drops
of washing-up liquid and then dry.
♦ Do not use solvents, or products with an acid or base pH
such as bleach, or abrasive products, for cleaning the
appliance.
♦ Do not let water or any other liquid get into the air vents
to avoid damage to the inner parts of the appliance.
♦ Never submerge the appliance in water or any other
liquid or place it under running water.
♦ If the appliance is not in good condition of cleanliness, its
surface may degrade and inexorably affect the duration
of the appliance’s useful life and could become unsafe
to use.
Cleaning the air lter:
♦ Clean the air lter (I) every 2 weeks. If the air lter is
blocked with dust, its effectiveness will be reduced.
♦ To disassemble the air lter, remove the two supporting
screws. Remove the air lter.
♦ Carefully, separate the evaporative pad from the air lter
without damaging it.
♦ Wash the air lter by submerging it carefully in warm
water with a neutral detergent, rinse it off and let it dry
completely in a shady place.
♦ Install the lter carefully after having them cleaned and
completely dry.
MaintainANCE of the evaporative pad:
♦ The evaporative pad (H) must be changed every approx-
imately 1,500 hours of use. It can be bought form any of
our Technical Assistance Services.
♦ Always turn-off and unplug the appliance from the mains
before undertaking this task.
♦ To replace the evaporative pad, remove the air lter and
separate the evaporative pad from the air lter.
♦ Carefully place the new evaporative pad and x the air
lter with the two screws again.
ANOMALIES AND REPAIR
♦ Take the appliance to an authorised technical support
service if product is damaged or other problems arise.
Do not attempt to disassemble or repair the appliance
yourself as this may be dangerous.
For EU product versions and/or in case that
it is requested in your country:
Ecology and recyclability of the product
♦ The materials of which the packaging of this appliance
consists are included in a collection, classication and
recycling system. Should you wish to dispose of them,
use the appropriate public recycling bins for each type
of material.
♦ The product does not contain concentrations of
substances that could be considered harmful to the
environment.
This symbol means that in case you wish to
dispose of the product once its working life has
ended; take it to an authorised waste agent for
the selective collection of Waste from Electric
and Electronic Equipment (WEEE).
This symbol means that product may include a
battery or batteries; user must to remove them
before disposing of the product. Remember that
batteries must be disposed of in duly authorised
containers. Do not dispose of them in re.
♦ The following information details the features related to
ecodesign.
BXAC50E
Maximum fan ow rate (F) 6,7 m
3
/min
Fan power input(P) 59,7 W
Service value (SV) (accord-
ing to IEC 60879)
0,11 (m
3
/min)/W
Standby power consump-
tion (PSB)
0,2 W
Fan sound power level
(LWA)
62,2 dB(A)
Maximum air velocity( c ) 7,7 metres/sec
This appliance complies with Directive 2014/35/EU on
Low Voltage, Directive 2014/30/EU on Electromagnetic
Compatibility, Directive 2011/65/EU on the restrictions of
the use of certain hazardous substances in electrical and
To Next Page
Loading...
Need help?
General
