EasyManua.ls Logo

Black+Decker BPP08HWTB - User Manual

Black+Decker BPP08HWTB
84 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
INSTRUCTION MANUAL
PORTABLE AIR CONDITIONER
Thank you for choosing BLACK+DECKER!
PLEASE READ BEFORE RETURNING THIS PRODUCT FOR
ANY REASON.
If you have a question or experience a problem with your BLACK+DECKER
purchase, go to www.blackanddecker.com/instantanswers
If you can’t find the answer or do not have access to the Internet, call
844-299-0879 from 10:30 a.m. to 6:30 p.m. EST Mon. - Fri. to speak with an
agent. Please have the catalog number available when you call.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
CATALOG NUMBER
BPP05WTB
BPP06WTB
BPP08WTB
BPP08HWTB
BPP10WTB
BPP10HWTB

Table of Contents

Questions and Answers

  • C
    Christopher GutierrezAug 9, 2025
    Why is my Black+Decker BPP08HWTB Air Conditioner not cool enough?
    • E
      Edward CarterAug 9, 2025
      If your Black+Decker Air Conditioner isn't cooling effectively, ensure all windows and doors are closed. Remove any heat sources from the room. Check that the exhaust air duct is properly connected and not blocked. Also, decrease the set temperature if it's too high, and clean the air filter if it's dusty. Note that the unit takes approximately 3 minutes to start cooling due to a microprocessor control delay.
  • B
    Beth McdonaldAug 18, 2025
    What to do if my Black+Decker Air Conditioner does not start?
    • G
      gonzalesnicoleAug 18, 2025
      If your Black+Decker Air Conditioner does not start, it could be due to a couple of reasons. First, the water full indicator light might be on, with the LED display showing “E2” in COOL mode or “E4” in HEAT mode, which means you need to drain the water. Second, the room temperature might be lower than the set temperature in cooling mode; in this case, reset the temperature.
  • M
    Marcus WrightAug 30, 2025
    What to do if the Black+Decker BPP08HWTB doesn't run and the water full indicator light is on?
    • B
      Brian BushAug 30, 2025
      If your Black+Decker Air Conditioner unit doesn't run and the water full indicator light is on (LED display indicates “E2” in COOL mode or “E4” in HEAT mode), it means the unit needs to be drained. Refer to the water drainage section to resolve this issue.

Summary

Safety Information

Important Safety Instructions

Essential guidelines for safe appliance operation and electrical handling.

Grounding Instructions

Explanation of electrical grounding requirements to prevent shock hazards.

LCDI Power Cord and Plug

Details on the Leakage Current Detection and Interruption power cord function.

General Safety Guidelines

Troubleshooting & Warranty

Pre-Service Checks

Basic checks to perform if the air conditioner fails to operate correctly.

Customer Service and Warranty

Contact information for customer support and details about product warranty.

Troubleshooting Common Issues

A chart listing common problems, their possible causes, and suggested remedies.

Limited Warranty Terms

Comprehensive explanation of warranty coverage, exclusions, and obtaining service.

Black+Decker BPP08HWTB Specifications

General IconGeneral
BrandBlack+Decker
ModelBPP08HWTB
CategoryAir Conditioner
LanguageEnglish

Related product manuals