EasyManua.ls Logo

Black+Decker BPP06WTB - User Manual

Black+Decker BPP06WTB
84 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
INSTRUCTION MANUAL
PORTABLE AIR CONDITIONER
Thank you for choosing BLACK+DECKER!
PLEASE READ BEFORE RETURNING THIS PRODUCT FOR
ANY REASON.
If you have a question or experience a problem with your BLACK+DECKER
purchase, go to www.blackanddecker.com/instantanswers
If you can’t find the answer or do not have access to the Internet, call
844-299-0879 from 10:30 a.m. to 6:30 p.m. EST Mon. - Fri. to speak with an
agent. Please have the catalog number available when you call.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
CATALOG NUMBER
BPP05WTB
BPP06WTB
BPP08WTB
BPP08HWTB
BPP10WTB
BPP10HWTB

Table of Contents

Questions and Answers

  • E
    emily67Aug 10, 2025
    Why is my Black+Decker Air Conditioner not cool enough?
    • W
      William HayesAug 10, 2025
      If your Black+Decker Air Conditioner isn't cooling effectively, ensure all windows and doors are closed. Remove any heat sources from the room. Check that the exhaust air duct is properly connected and not blocked. Also, decrease the set temperature if it's too high, and clean the air filter if it's dusty. Note that the unit takes approximately 3 minutes to start cooling due to a microprocessor control delay.
  • C
    Carolyn TuckerAug 19, 2025
    What to do if my Black+Decker BPP06WTB Air Conditioner does not start?
    • K
      Kimberly DoyleAug 19, 2025
      If your Black+Decker Air Conditioner does not start, it could be due to a couple of reasons. First, the water full indicator light might be on, with the LED display showing “E2” in COOL mode or “E4” in HEAT mode, which means you need to drain the water. Second, the room temperature might be lower than the set temperature in cooling mode; in this case, reset the temperature.
  • A
    Andrea LucasAug 29, 2025
    What to do if the Black+Decker BPP06WTB doesn't run and the water full indicator light is on?
    • A
      Anthony MartinezAug 30, 2025
      If your Black+Decker Air Conditioner unit doesn't run and the water full indicator light is on (LED display indicates “E2” in COOL mode or “E4” in HEAT mode), it means the unit needs to be drained. Refer to the water drainage section to resolve this issue.

Summary

Safety Information

Important Safety Instructions

Essential guidelines to prevent hazards during appliance operation.

Handling Alkaline Batteries

Precautions for safe handling and disposal of batteries.

Grounding Instructions

Electrical grounding requirements for user safety and preventing shock.

LCDI Power Cord and Plug

Details on the Leakage Current Detection and Interruption power cord.

Safety Guidelines

General do's and don'ts for safe operation and energy saving tips.

Set Up & Use

Installation Location Guidelines

Window Slider Kit Installation

Step-by-step guide for installing the window slider kit for exhaust.

Exhaust Hose Installation

Control Panel Functionality

Basic Operation Startup

Cool Mode Operation

Dehumidify Mode Operation

Heat Mode Operation

Timer Settings

Remote Control Button Guide

Dehumidify, Fan, Heat, and Swing Modes

Water Drainage for Cooling and Heat Modes

Continuous Draining for Dehumidification Mode

Troubleshooting & Warranty

Before Calling for Service

Initial checks to perform when the unit fails to operate correctly.

Customer Service and Support

Troubleshooting Guide

Common problems, their causes, and suggested remedies for the unit.

Limited Warranty Information

Details on warranty coverage, exclusions, and how to obtain service.

Black+Decker BPP06WTB Specifications

General IconGeneral
TypePortable Air Conditioner
Cooling Capacity6, 000 BTU
Fan Speeds3
Filter TypeWashable
RefrigerantR410A
Voltage115V
Power SupplyCorded Electric
ColorWhite
FeaturesRemote Control
Control TypeElectronic
Power Consumption650W
Warranty1 Year Limited

Related product manuals