EasyManua.ls Logo

Black+Decker BPP10WTB - User Manual

Black+Decker BPP10WTB
84 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
INSTRUCTION MANUAL
PORTABLE AIR CONDITIONER
Thank you for choosing BLACK+DECKER!
PLEASE READ BEFORE RETURNING THIS PRODUCT FOR
ANY REASON.
If you have a question or experience a problem with your BLACK+DECKER
purchase, go to www.blackanddecker.com/instantanswers
If you can’t find the answer or do not have access to the Internet, call
844-299-0879 from 10:30 a.m. to 6:30 p.m. EST Mon. - Fri. to speak with an
agent. Please have the catalog number available when you call.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
CATALOG NUMBER
BPP05WTB
BPP06WTB
BPP08WTB
BPP08HWTB
BPP10WTB
BPP10HWTB

Table of Contents

Questions and Answers

  • R
    Rachael SantiagoAug 9, 2025
    Why is my Black+Decker Air Conditioner not cool enough?
    • D
      Daniel AdamsAug 10, 2025
      If your Black+Decker Air Conditioner isn't cooling effectively, ensure all windows and doors are closed. Remove any heat sources from the room. Check that the exhaust air duct is properly connected and not blocked. Also, decrease the set temperature if it's too high, and clean the air filter if it's dusty. Note that the unit takes approximately 3 minutes to start cooling due to a microprocessor control delay.
  • A
    amber93Aug 18, 2025
    What to do if my Black+Decker BPP10WTB Air Conditioner does not start?
    • T
      Teresa BeasleyAug 18, 2025
      If your Black+Decker Air Conditioner does not start, it could be due to a couple of reasons. First, the water full indicator light might be on, with the LED display showing “E2” in COOL mode or “E4” in HEAT mode, which means you need to drain the water. Second, the room temperature might be lower than the set temperature in cooling mode; in this case, reset the temperature.
  • J
    Julie CummingsAug 30, 2025
    What to do if the Black+Decker BPP10WTB doesn't run and the water full indicator light is on?
    • M
      Miguel LeeAug 30, 2025
      If your Black+Decker Air Conditioner unit doesn't run and the water full indicator light is on (LED display indicates “E2” in COOL mode or “E4” in HEAT mode), it means the unit needs to be drained. Refer to the water drainage section to resolve this issue.

Summary

SAFETY INFORMATION

Grounding and Electrical Requirements

Understanding proper grounding and electrical connections for safety.

LCDI Power Cord and Plug Features

General Safety Guidelines and Energy Saving

SET UP & USE

Window Slider Kit Installation Procedure

Air Exhaust Hose Installation Guide

Instructions on how to properly connect and install the air exhaust hose.

Control Panel and Appliance Operation

Remote Control Functions Overview

Detailed description of all buttons and features on the remote control.

Water Drainage Procedures (Cool;Heat Modes)

Instructions for draining water from the unit in Cool and Heat modes.

Continuous Draining for Dehumidification

TROUBLESHOOTING & WARRANTY

Pre-Service Troubleshooting Steps

Initial checks to resolve common issues before contacting support.

Customer Support and Contact Information

How to contact customer service for assistance and warranty claims.

Product Limited Warranty Terms

Details regarding the warranty period, coverage, and exclusions.

Black+Decker BPP10WTB Specifications

General IconGeneral
TypePortable Air Conditioner
Cooling Capacity10, 000 BTU
Room Size CoverageUp to 250 sq. ft.
Fan Speeds3
ModesCool, Fan, Dehumidify, Sleep
Digital DisplayYes
Remote ControlYes
Filter TypeWashable
RefrigerantR32
Voltage115V
Installation TypePortable
Timer24-hour
DehumidificationYes
Power Supply115V
Programmable TimerYes

Related product manuals