EasyManua.ls Logo

Black+Decker BPP05WTB - User Manual

Black+Decker BPP05WTB
84 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
INSTRUCTION MANUAL
PORTABLE AIR CONDITIONER
Thank you for choosing BLACK+DECKER!
PLEASE READ BEFORE RETURNING THIS PRODUCT FOR
ANY REASON.
If you have a question or experience a problem with your BLACK+DECKER
purchase, go to www.blackanddecker.com/instantanswers
If you can’t find the answer or do not have access to the Internet, call
844-299-0879 from 10:30 a.m. to 6:30 p.m. EST Mon. - Fri. to speak with an
agent. Please have the catalog number available when you call.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
CATALOG NUMBER
BPP05WTB
BPP06WTB
BPP08WTB
BPP08HWTB
BPP10WTB
BPP10HWTB

Table of Contents

Questions and Answers

  • J
    Jerry CarpenterJul 28, 2025
    Why is my Black+Decker BPP05WTB Air Conditioner not cool enough?
    • T
      tanner41Jul 28, 2025
      If your Black+Decker Air Conditioner isn't cooling effectively, ensure all windows and doors are closed. Remove any heat sources from the room. Check that the exhaust air duct is properly connected and not blocked. Also, decrease the set temperature if it's too high, and clean the air filter if it's dusty. Note that the unit takes approximately 3 minutes to start cooling due to a microprocessor control delay.
  • S
    Shannon SanchezAug 8, 2025
    What to do if my Black+Decker BPP05WTB Air Conditioner does not start?
    • S
      Steven KlineAug 8, 2025
      If your Black+Decker Air Conditioner does not start, it could be due to a couple of reasons. First, the water full indicator light might be on, with the LED display showing “E2” in COOL mode or “E4” in HEAT mode, which means you need to drain the water. Second, the room temperature might be lower than the set temperature in cooling mode; in this case, reset the temperature.
  • J
    Jordan BrowningAug 18, 2025
    What to do if the Black+Decker BPP05WTB Air Conditioner doesn't run and the water full indicator light is on?
    • C
      Charles SullivanAug 18, 2025
      If your Black+Decker Air Conditioner unit doesn't run and the water full indicator light is on (LED display indicates “E2” in COOL mode or “E4” in HEAT mode), it means the unit needs to be drained. Refer to the water drainage section to resolve this issue.

Summary

Safety Information

Important Safety Instructions

Grounding Instructions

Set Up & Use

Parts & Features

Specifications

Installation Guide Location

Window Slider Kit Installation

Exhaust Hose Installation

Control Panel

Details the functions and indicators of the appliance's control panel.

Operating from the Control Panel

Instructions on how to turn the appliance on and select modes using the control panel.

Cool Mode

Dehumidify Mode

Heat Mode

Timer

Water Drainage for Cooling and Heat Modes

Instructions for intermittent and continuous water drainage in cooling/heat modes.

Continuous Draining for Dehumidification Mode

Instructions for continuous water drainage in dehumidification mode.

Cleaning & Care

Cleaning the Cabinet

Cleaning the Filter

Steps for cleaning the air filter to maintain efficiency.

Troubleshooting & Warranty

Before You Call for Service

Initial checks to perform before contacting customer service for operational issues.

Customer Service

Important contact information and process for customer support.

Troubleshooting Chart

A chart listing common problems, their causes, and possible remedies.

Limited Warranty

Black+Decker BPP05WTB Specifications

General IconGeneral
BrandBlack+Decker
ModelBPP05WTB
CategoryAir Conditioner
LanguageEnglish

Related product manuals