EasyManua.ls Logo

Black+Decker BPP08WTB - User Manual

Black+Decker BPP08WTB
84 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
INSTRUCTION MANUAL
PORTABLE AIR CONDITIONER
Thank you for choosing BLACK+DECKER!
PLEASE READ BEFORE RETURNING THIS PRODUCT FOR
ANY REASON.
If you have a question or experience a problem with your BLACK+DECKER
purchase, go to www.blackanddecker.com/instantanswers
If you can’t find the answer or do not have access to the Internet, call
844-299-0879 from 10:30 a.m. to 6:30 p.m. EST Mon. - Fri. to speak with an
agent. Please have the catalog number available when you call.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
CATALOG NUMBER
BPP05WTB
BPP06WTB
BPP08WTB
BPP08HWTB
BPP10WTB
BPP10HWTB

Table of Contents

Questions and Answers

  • R
    rchandlerAug 9, 2025
    Why is my Black+Decker Air Conditioner not cool enough?
    • W
      William WatkinsAug 9, 2025
      If your Black+Decker Air Conditioner isn't cooling effectively, ensure all windows and doors are closed. Remove any heat sources from the room. Check that the exhaust air duct is properly connected and not blocked. Also, decrease the set temperature if it's too high, and clean the air filter if it's dusty. Note that the unit takes approximately 3 minutes to start cooling due to a microprocessor control delay.
  • A
    Amanda LesterAug 18, 2025
    What to do if my Black+Decker BPP08WTB Air Conditioner does not start?
    • D
      Dustin GomezAug 19, 2025
      If your Black+Decker Air Conditioner does not start, it could be due to a couple of reasons. First, the water full indicator light might be on, with the LED display showing “E2” in COOL mode or “E4” in HEAT mode, which means you need to drain the water. Second, the room temperature might be lower than the set temperature in cooling mode; in this case, reset the temperature.
  • L
    Laurie MorganAug 29, 2025
    What to do if the Black+Decker BPP08WTB doesn't run and the water full indicator light is on?
    • L
      Laura ConleyAug 29, 2025
      If your Black+Decker Air Conditioner unit doesn't run and the water full indicator light is on (LED display indicates “E2” in COOL mode or “E4” in HEAT mode), it means the unit needs to be drained. Refer to the water drainage section to resolve this issue.

Summary

Safety Information

Important Safety Instructions

Key safety precautions to follow when using the appliance.

Electrical Safety

Information on grounding, power cords, and outlets.

LCDI Power Cord and Plug

Safety Guidelines

Set Up & Use

Installation Guide

Window Slider Kit Installation

Exhaust Hose Installation

Control Panel Operation

Explanation of the control panel buttons and basic unit operation.

Operating Modes

How to select and use Cool, Dehumidify, Fan, and Heat modes.

Remote Control Operation

Instructions for remote control battery installation and basic use.

Remote Control Layout

Unit Indicators and Buttons

Water Drainage Procedures

Troubleshooting & Warranty

Troubleshooting Common Issues

Initial checks to perform if the unit is not operating correctly.

Customer Support Information

Limited Warranty Details

Information regarding product warranty coverage, duration, and exclusions.

Black+Decker BPP08WTB Specifications

General IconGeneral
BrandBlack+Decker
ModelBPP08WTB
TypePortable Air Conditioner
Cooling Capacity8, 000 BTU
ModesCool, Fan, Dehumidify
Fan Speeds3
Digital DisplayYes
Remote ControlYes
Timer24-hour
RefrigerantR410A
Power Source115V / 60Hz
Room Size CoverageUp to 200 sq ft
Water Tank CapacitySelf-evaporative system
Included AccessoriesRemote control, window installation kit

Related product manuals