Black+Decker MT218KB - Maintenance; Technical Data

10
ENGLISH
(Original instructions)
Accessories
The performance of your tool depends on
the accessory used. BLACK+DECKER and
Piranha accessories are engineered to high
quality standards and designed to enhance
the performance of your tool. By using
these accessories you will get the very best
from your tool.
Maintenance
Your BLACK+DECKER corded/cordless
appliance/tool has been designed to
operate over a long period of time with a
minimum of maintenance. Continuous
satisfactory operation depends upon proper
tool care and regular cleaning.
Warning! Before performing any
maintenance on corded/cordless power
tools:
• Switch off and unplug the appliance/tool.
• Or switch off and remove the battery
from the appliance/tool if the
appliance/tool has a separate battery
pack.
• Or run the battery down completely if it
is integral and then switch off.
• Unplug the charger before cleaning it.
Your charger does not require any
maintenance apart from regular cleaning.
• Regularly clean the ventilation slots in
your appliance/tool/charger using a soft
brush or dry cloth.
• Regularly clean the motor housing using
a damp cloth. Do not use any abrasive or
solvent-based cleaner.
• Regularly open the chuck and tap it to
remove any dust from the interior (when
fitted).
Batteries
Run the battery down completely,
then remove it from the tool.
• NiCd, NiMH and Li-Ion batteries are
recyclable. Take them to any authorised
repair agent or a local recycling station.
Technical data
MT218 (H1)
Voltage V
DC
18
Drill / Screwdriver MTDD6 (H1)
No-load speed min
-1
0-800
Max. torque Nm 20.9
Chuck capacity mm 10
Weight kg 1.1
Max. drilling capacity
Steel mm 10
Wood mm 25
Battery BL1518
Voltage V
DC
18
Capacity Ah 1.5
Type Li-Ion
Charger
905902** (Typ 1)
Input voltage V
AC
100 - 240
Output voltage V
DC
8 - 20
Current mA 400
Approx. charge time h 3 - 5
Vibration total values (triax vector sum) according to EN 60745:
Drilling into metal (a
h, D
) < 2.5 m/s
2
, uncertainty (K) 1.5 m/s
2
Screwdriving without impact (a
h
) < 2.5 m/s
2
, uncertainty (K) 1.5 m/s
2
Level of sound pressure according to EN 60745:
Sound pressure (L
pA
) 94.2 dB(A), uncertainty (K) 3 dB(A)
Sound power (L
WA
) 105.2 dB(A), uncertainty (K) 3 dB(A)