What to do if Black+Decker PPRH5B unit will not charge?
First, ensure that the inverter power switch is in the off position. Next, verify that a suitable gauge extension cord is properly connected to both the unit and a functioning AC outlet.
What to do if Black+Decker PPRH5B Power Supply USB power port will not power appliance?
First, ensure that the USB power button is in the on position. Also, check that the unit has a full charge; recharge it if necessary. Note that some USB-powered household electronics are not compatible with this USB charging/power port, so consult the electronic device's manual to confirm compatibility.
What to do if Black+Decker PPRH5B Power Supply 12 volt DC accessory outlet will not power appliance?
Make sure the appliance does not draw more than 5 amps. Also, check that the unit has a full charge, and recharge it if necessary.
How to fix Black+Decker PPRH5B LED area light that does not come on?
Ensure that the area light power button is in the on position. Also, check that the unit has a full charge and recharge it if necessary.
Covers general precautions for household use and avoiding hazards.
Specific safety instructions for charging the unit.
Safety precautions when using the jump starter function.
Safety instructions specific to the air compressor function.
Instructions and recommendations for charging the unit.
Step-by-step guide for connecting clamps and starting a vehicle.
Lists common problems and their troubleshooting steps.
General| Model | PPRH5B |
|---|---|
| Brand | Black+Decker |
| Type | Portable Power Station |
| DC Output | 12V/10A |
| Battery Type | Lithium-Ion |
| Input | 12V DC |
| Cycle Life | 500+ cycles |
| Warranty | 2 years |
| Voltage | 12V |
| USB Ports | 2x USB-A (5V/2.4A), 1x USB-C (5V/3A) |
To Next Page