CF 300 – Flight Manual sect. 4 – Normal Operating Procedures
BY BLACKSHAPE
n° BPU/FM003 Rev 3 dtd 03/06/2014 Page 41
(13) Right Flap and hinges:
(A) CHECK Integrity and good conditions
(B) CHECK plays and controls
(14) Right Aileron:
(A) CHECK Integrity and good conditions
(B) CHECK control fittings attachment points, control and joints
(15) Right Wing Tip:
(A) CHECK Integrity and good conditions
(B) CHECK strobe and navigation lights
(16) Leading Edge and Wing Skin (RH):
(A) CHECK Integrity, cleaning and good conditions
(B) CHECK inspections doors
(17) Right Main Landing Gear:
(A)Main Leg Conditions
(B)Shocks Conditions
(C)Tire wear
(D)Tire pressure
(18) Upper/lower cowling:
(A) CHECK Integrity, cleaning and good conditions
(B) CHECK Air Intake
(19) Propeller and Spinner:
(A) CHECK fixing and condition of material (absence of chipping, plays)
(20) Control engine compartment:
(A) Foreign bodies Absent
(B) Cooling circuit Absence of leaks
(C) Coolant CHECK quantity
(D) Coolant Radiator Absence of leaks
(E) Oil circuit Absence of leaks
(F) Propeller Rotate 6/10 rounds
To Next Page
Loading...