To Next PageTo Next Page
Need help?Do you have a question about the Blackstar Debut 50R and is the answer not in the manual?
General| Power Output | 50W |
|---|---|
| Effects | Reverb |
| Speaker Size | 12 inches |
| Channels | 2 (Clean, Overdrive) |
| EQ Controls | Bass, Middle, Treble |
| Inputs | 1 x 1/4" (instrument) |
| Footswitch I/O | 1 x 1/4" (Footswitch) |
| Footswitch | Optional |
Instructions for safely disconnecting the apparatus from the main power supply.
Warning to prevent fire or electric shock by avoiding liquids and moisture.
Advises against opening the case due to high internal voltages and directs servicing to qualified personnel.
Guidance on preventing hearing damage from high sound levels and permissible exposure limits.
Instructions for proper disposal of electrical and electronic products.
Explains the ISF circuit for tone shaping, allowing adjustment from USA to UK characteristics.
Describes the line output for recording or headphone use, emulating a speaker cabinet.
Details the Line Input for jamming and the Effects Loop for external effects.
Details the input jack and volume controls for both Clean and Overdrive channels.
Covers bright switch, channel selection, gain, equalization, and the ISF tone control.
Explains reverb settings, power reduction feature, and power indicator/switch.
Details the mains power input and the line out/headphone jack for audio output.
Covers the footswitch, line input for external devices, and the effects loop.
