9、Passwords resetting
Open "H Band" --> My --> My equipment --> Reset the device password.
User can set up the connection password as needed, after setting up the connection
password, the password is required when connecting the mobile phone to the wristband. The
initial passwords is 0000, which can be reset by the user.
If you forgot the password, keep long press for 6s on the standby interface to clear the
password, and the user can connect the mobile phone to the wristband without the password.
If you want to reset the password, the old password is: 0000.
10、Firmware update
Open "H Band" --> My --> My equipment --> Firmware update.
In case there’s any new edition of the equipment program, connect APP and it shall
remind the firmware updating.
11、Clear data
Open "H Band" --> My --> My equipment --> Clear data.
Once this operation is started, the watch shall eliminate all the data and the on-off state
of all the functions shall be recovered to default.
The default state of watch functions:
Unit: Metric system
Sport aim (5km/h): 8000
Main interface style: Default
The default switch is on: Wrist rotating scree-on, correct wearing checking and heart
rate monitoring
Precautions
Only one connection APP is allowed to be installed on the mobile terminal and it should stay
in normal connection, or the data cannot be synced. In case there are multiple connection
To Next Page
Loading...