7. Time Countdown
Find the Time Countdown function in the Function Menu interface, click to open, and you
can set the hours, minutes and seconds to count down. After setting the time, click Start to return
to the Function Menu. The countdown will continue in the background. When the countdown is
completed, there will add the pop-up window and vibrates to remind.
8. Settings
Find the Settings function in the function menu interface, click to open the Setting function,
you can set the Brightness adjustment and download the APP QR code. Brightness adjustment is
divided into 12 levels, which can be adjusted according to their own needs. The higher the
brightness is, the greater the power consumption will be. Scan QR code of APP to download H
Band.
Mobile APP function introduction
Notes: The APP sync data function synchronizes the step data and the heart rate data
automatically every 30 minutes. If you turn on automatic heart rate monitoring, the test will be
performed every 10 minutes and the data will be uploaded to the APP.
1、Message Reminder
Turn on "H Band"-> My-> My device-> Message Reminder, you can freely control the
function switch which can push messages to the watch. If the function switch is off, the
messages cannot be pushed to the watch; if it is on, the messages are normally pushed to the
watch. (Note: If you can't switch normally, please click the help in the upper right corner to
troubleshoot)
To Next Page
Loading...