Need help?Do you have a question about the Blade 230 S and is the answer not in the manual?
Defines procedures that may cause property damage but little/no injury.
Defines procedures that may cause property damage and serious injury.
Defines procedures that may cause property damage, collateral damage, and serious injury.
Explains the meaning of LED lights during battery charging.
Selects between Stability, Intermediate, and Agility flight modes.
Identifies key controls like Bind/Panic Switch, Throttle Hold, and Dual Rate Switch.
Details transmitter settings for Model Type, Swash Type, and Travel Adjust.
Covers D/R & Expo, Throttle Curve, and Pitch Curve settings.
Explains how to use the Panic Mode switch for recovery.
Configuration for Model Type, Swash Type, and F-Mode Setup.
Details Servo Setup, D/R & Expo, and Throttle/Pitch Curves.
Describes how to activate Panic Mode using the Bind/I Button.
Instructions for connecting the battery and initializing the ESC.
Step-by-step guide to bind the transmitter and receiver.
Explains Stability, Intermediate, and Agility modes and dual rates.
How to use the panic switch for emergency recovery.
Verifies operation of elevator, aileron, and collective pitch servos.
Verifies main and tail rotor spin direction for correct operation.
Adjustable parameters affecting stability and response rates.
Displays gain parameters and their values during adjustment.
Procedure to enter the mode for adjusting servo neutral positions.
Steps to align servo arms perpendicular to servos.
Procedure to save servo adjustments and exit the mode.
Guidance on proper disposal of waste electrical and electronic equipment.
To Next Page
General
