Need help?Do you have a question about the Blade Night 230 S and is the answer not in the manual?
General| Replica | No |
|---|---|
| Motor type | Brushless |
| Engine type | Electric engine |
| Product type | Helicopter |
| Built-in servo | Yes |
| Housing material | FRP (Fiber Reinforced Plastic) |
| Number of rotors | 2 rotors |
| Construction type | Bind-N-Fly (BNF) |
| Rotor configuration | Collective pitch |
| Stabilization system | Flybarless (FBL) rotor head |
| Number of main rotor blades | 2 |
| Package weight | 350 g |
| Product color | Multicolor |
| Number of batteries supported | 1 |
Weight and Dimensions| Length | 474 mm |
|---|---|
| Rotor diameter | 536 mm |
| Tail rotor diameter | 235 mm |
Lists essential safety rules for operating the model.
Steps to prepare the helicopter and transmitter for the first flight.
Crucial safety warnings related to charging Li-Po batteries.
Procedure to bind the transmitter to the helicopter's receiver.
Explanation of the SAFE flight stabilization system.
How to select and use different flight modes and rates.
How to use the Panic Recovery feature for stabilization.
General advice and steps for flying the helicopter.
How to modify gain parameters for flight characteristics.
How to conduct the trim flight and what to observe.
Steps to calibrate the helicopter's sensors and system.
Common problems and their solutions for the helicopter.
Details of the product's warranty coverage and limitations.
To Next Page
