BLADEZ Discover - Program Mode Details

TREADMILL OPERATIONS
16
P2 9 Hole LEVEL：Initial Value1 Range， 1~10， step1，3500 meter is the course length.
P3 Hill Climb LEVEL
：Initial Value1 Range， 1~10，step 1
time：Pre-set value 30min；Range 20~99min
，step 1 min
P4 Hill Run
P5 Interval
P6 Rolling
P7 Weight loss
P8 Custom
Setting: time, program executed value (setting time is executed in 30 segments)
（）1 After pressing Mode button, the LEVEL light is on, window flashes. This function is to
select elevation ( L1~L10) . You can press arrows to change and press ENTER to
confirm or accept change.
（）2 After selecting level, TIME window will start to flash. At this time press, to set the
time or press START key directly to start right away without entering parametersexercise
range of time value :20~99 min, pre-set 30min, step 1 min.
PROGRAM has 30 segments: (SE01~SE30) and all the pre-set values are the lowest values.
8. After 30 seconds following the End of a program, it will also go back to the Start/Ready position.
9. The time pre-set value is 0, range is 20~99. At the flashing display of 20 minutes, press
UP/DOWN speed keys to set desired time
V. Program Mode
P1 Manual Program ：；Pre-set value 0min Range 20 ~ 99 min step 1 min, no Level (incline)
P1 is also a Manual except that the time must be set or defaulted to 10 minutes. Incline is available
during the workout.
LEVEL
：Initial Value1 Range， 1~10，step 1
time：Pre-set value 30min；Range 20~99min
，step 1 min
LEVEL
：Initial Value1 Range， 1~10，step 1
time：Pre-set value 30min；Range 20~99min
，step 1 min
LEVEL
：Initial Value1 Range， 1~10，step 1
time：Pre-set value 30min；Range 20~99min
，step 1 min
LEVEL
：Initial Value1 Range， 1~10，step 1
time：Pre-set value 30min；Range 20~99min
，step 1 min
time：Pre-set value 30min；Range 20~99min
，step 1 min