EasyManua.ls Logo

BLADEZ MOBY X - Getting Started; Package Contents; Unfolding the Powerboard; Fueling the Powerboard

BLADEZ MOBY X
15 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 8 of 15
PACKAGE CONTENTS
Your Bladez MOBY comes with the following items in the box. Please locate all of
the following:
1. The Bladez MOBY X Gas Power Board
2. Tanaka Spark Plug Wrench
3. Allen Wrench
4. Product Handbook
GETTING STARTED
Please read and understand these instruction and the OPERATING
PROCEDURES section, prior to starting or riding your Power Board
Unfolding
1. To unfold the MOBY, begin by pressing
down on the FOLDING HANDLE with
one hand (Fig. 1), while gently pulling up
on the handlebars with the other.
2. Fully extend the handlebars to their
upright position until you feel the
mechanism lock into place.
3. When you first take the MOBY out of the
box, the Handlebar is not connected to
the T-Handle Stem. Remove the top
bracket from the stem and attah BRAKE
LEVER and Throttle LEVER are in the
down position for shipping. Using the
provided Allen Wrench, loosen the
tension bolt, and adjust the levers to a
comfortable position.
Fueling
This is a two-stroke engine. Always run
the engine using fuel, which is mixed
with 2-cycle engine oil.
PLEASE READ OPERATING
PROCEDURES BEFORE FUELING!
4. Mix fuel (minimum 89 octane) and 2-
cycle engine oil in separate container
(Fig. 3). Use Tanaka Perfect Mix or a
quality 32:1 2-cycle oil. Make sure the

Related product manuals